How do I fix my Kodak EasyShare camera?

How do I fix my Kodak EasyShare camera?

First, make sure the memory card has room to record more photos. Next, turn the Kodak camera off for 10 seconds, and then press the power button again. If you still cannot shoot photos, try removing the battery for at least 15 minutes to reset the camera.

How do I connect my Kodak EasyShare to my computer?

Make sure your EasyShare camera has some photos on it, and connect it to your PC using the provided USB cable. Turn the camera on. Windows recognizes the device and opens a list of options. Click “Transfer Photos Using Kodak EasyShare.” A window appears with thumbnail images of all the photos on your camera.

How do I charge my Kodak Easyshare camera?

Plug the USB AC adapter into a working power outlet. Connect the USB cable to your camera and to the USB AC adapter. If you have an EASYSHARE M873 or M883 Zoom Digital Camera, turn on your camera. Wait for your camera battery to charge (approximately 3 hours).

How do I reset my Kodak Easyshare camera?

Press and hold the factory reset button found on the side of the camera for 10 seconds. The LED light will turn off, then flash red. You will need to set up your camera again after factory resetting it.

What do you do when your Kodak camera wont turn on?

Hold down power button If the camera is off and will not turn on when pushing the power button, a simple solution may fix the problem. In order to turn on the camera while it is off, press and hold the power button until the camera turns on.

Does Kodak Easyshare work with Windows 10?

Kodak no longer supports it. References Windows 8.1, but the same principles should apply to Windows 10 too.

What is Kodak Easyshare software?

Kodak Easyshare is software to organize, view and edit your photos – whether or not you have a Kodak camera. You can use Kodak Easyshare without actually having a Kodak account, however you’ll find many places in the application where it encourages you to do so.

How long does it take for a Kodak camera to charge?

– To charge your camera, plug it into a wall outlet using the included micro USB cable and any wall adapter rated for 1 Amp. The battery LED indicator will blink red until the battery is fully charged. – Your KODAK PRINTOMATIC may take up to 2 hours to fully charge.

Back To Top