Do magnetic locks work on doors?
They are often installed on emergency exits, delayed egress and controlled egress doors. Below are the most useful applications for magnetic locks: For glass doors, single doors and double doors, automatic swing and sliding doors.
How strong are magnetic door locks?
Because the mating area of the electromagnet and armature is relatively large, the force created by the magnetic flux is strong enough to keep the door locked even under stress. Typical single door electromagnetic locks are offered in both 600 lbs. (2669 N) and 1200 lbs. (5338 N) dynamic holding force capacities.
How do you unlock electromagnetic locks?
As the electric power activates the magnet, the bolt locks the door. To unlock the door, simply remove power. Electromagnetic locks are used to secure the door in conjunction with push bars, request-to-exit devices or credential readers for fail-safe applications when code compliance permits.
Do magnetic locks work without power?
Maglocks are electromagnetic locks only operable with constant additional power supply, and if there is not an additional power supply available, the magnets will not work. Fail-secure locks attracts the armature plate, leaving the door magnetically locked when power is lost from the device.
Do magnetic locks get hot?
A power supply with less than sufficient amperage to consistently power your strike lock will cause your solenoid to “run” hotter. On the hand, a voltage supply that is too high, higher than the solenoid is rated to accept, will also result in a hot strike lock.
Can you bypass an electromagnetic lock?
To beat electromagnetic door locks, cut a 0.015-inch aluminum plate and secure it with adhesive on the strike plate. This would reduce the magnet lock’s holding force from over 1,200 pounds to approximately 300 pounds.
Are mag locks fail safe?
Maglocks require constant power to stay locked, making them fail-safe. That could lead to an unsecured opening in the event of a power outage.
Can a magnetic door lock be used with an electromagnetic lock?
The SDC Electromagnetic Lock is Suited For Interior Doors, Perimeter Exit Doors and Entrances that Require Failsafe Emergency Release Capability. Compatible with any access control system, SDC 1500 series Magnetic door locks meet the demands of security professionals, and the most rigorous building and fire life safety codes in the world.
When to contact pros on call magnetic door locks?
Today, magnetic door locks enhance the security of many businesses both large and small. When you require the installation, repair or maintenance of these specialized locks, contact Pros On Call. Our company dispatches expert local technicians to provide comprehensive mobile locksmith services.
Do you need magnetic door locks for babyproofing?
These magnetic cabinet locks provide you with the level of safety that you require. If you are looking to babyproof your house, then you need to get your hands on these cabinet locks. These magnetic cabinet locks pr…
Which is the best type of door lock?
To wear out or break, which assures a locking device with an extremely long life. Can be mounted anywhere, at any angle. The DKML (DoorKing Magnetic Lock) series of magnetic locks offer a wide range of high quality electro-magnetic locks (1200, 600 and 300 Lb locks) and brackets to accommodate almost any access control door locking requirement.
