How can I bypass pass theft deterrent system?
Thankfully this is an easy fix.
- Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
- Look at the dashboard and locate the theft system light.
- Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.
How do you reset the theft system GM?
How to Reset the Passlock System on GM Cars
- Insert your key in the starter, start you car as you usually would and let it stall. Keep the key in the “On” position.
- Wait until the “Theft Sys” light on your dashboard stays on without blinking. This will take approximately 10 to 15 minutes.
How long does it take for PassLock to reset?
This will take approximately 10 to 15 minutes. Start the car immediately once the “Theft Sys” light stays on steadily. Remember to not turn the key off. Your car will now reset the passlock system and start as usual.
Can you bypass a Ignition Control Module?
To allow the ECU to take control of ignition timing it will “bypass” the ignitor and send the signal to the ECU for ignition timing processing. The ECU then sends a signal back to the ignitor with the ignition timing adjusted and then the ignitor module fires the coil.
How do I reset my GM Anti-theft system?
What is the security system on a Chevy Lumina?
The security system on a 1999 Chevrolet Lumina is designed to protect the vehicle from theft and vandalism. This system is controlled by the body control module (BCM). When the BCM detects a problem with the security system it stores a trouble code in its internal flash memory and illuminates the security light on the dashboard.
When did the GM Pro bypass module come out?
At NEWROCKIES Inc., we’ve designed our PRO Bypass Module in 2008 with the specific purpose of bypassing faulty GM VATS, Passkey and Passlock security systems IN FULL.
How can I bypass the GM security system?
Thousands of people are trying to bypass GM Security Systems the wrong way. They just bypass a small part of it (key and lock) and so end up with their car stuck again with the exact same problem far away from home and without understanding why.
Is there a way to bypass the PassLock system?
The Passlock system can be bypassed, but an extensive amount of work is required to do so. Pull the hood release lever on the left side of the driver’s side foot well.
