What is the standard thickness of standard drywall?
1/2-inch thick
Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall. It’s 13 pounds lighter than other varieties for the same size and thickness.
What thicknesses of sheetrock are there?
Panels are available in four drywall thicknesses—5/8-in., 1/2-in., 3/8-in., and 1/4-in. (above are all 5/8-in.). Each drywall thickness has specific applications and framing requirement.
What thickness of OSB is used for walls?
5/16 inch
According to the California Uniform Building Code, the minimum recommended thickness for structural panels used in wall sheathing is 5/16 inch for studs 16 inches on center and 3/8 inch for studs 24 inches on center.
What width does drywall come in?
4 feet wide
The most common size of drywall is 4 feet wide and 8 feet long. Since 1/2-inch thick sheets of 4- by 8-foot drywall tip the scales at 57 pounds, this size tends to be the biggest sheet that most do-it-yourselfers can carry and lift into place.
What is the actual thickness of 1/2 inch drywall?
Drywall is sold in several standard thicknesses: 1/4-inch (6.35mm) 3/8-inch (9.52mm) 1/2-inch (12.7mm)
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
Can you hang drywall on 24 centers?
Always use 5/8 on 24″ centers. You can rent a drywall lift from “The Big Boxes” for about $30 a day so you won’t kill your back trying to lift & shift the rock. If you use 1/2 it will sag eventually. When it sags you will get the “Amphitheater look” between each joist.
Is OSB stronger than plywood?
Wood fiber is used more efficiently in osb. Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.
How do I choose drywall thickness?
Use a sheet size that minimizes the number of seams that will appear in the finished product. Drywall comes in various thicknesses, 3/8 inch and 1/2 inch being the most common. Thicker sheets are needed if nails or screws will be far apart — for example, if there is a large gap between studs or joists.
What is the recommended stud spacing for drywall?
Why You Should Find Studs They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.
How is drywall thickness measured?
To determine the thickness of damaged drywall that you plan to replace, start by cutting a hole and using a tape measure to determine its thickness. Be sure to use extra care when checking the thickness of drywall on a ceiling or inside a garage, where thicker drywall is usually placed.
What is the thickness of 1/2 inch plywood?
The actual thickness is just like it sounds – the actual thickness of the plywood panels you buy, after sanding. Typically, the actual thickness of plywood is 1/32 inch less than the nominal thickness….Thickness in millimeters.
| Thickness (inch) | Thickness (milimeter) |
|---|---|
| 1/2” | 12.7mm |
| 5/8” | 15.9mm |
| 3/4” | 19mm |
| 1-1/8” | 28.6mm |
