# How big is a dekatherm?

## How big is a dekatherm?

A dekatherm is a unit of energy that is equal to one million British thermal units or ten therms. Primarily used in the natural gas industry, dekatherms measure the actual heating value of a specific volume of natural gas.

## How many cubic feet are in a dekatherm?

1,026 cubic feet
The volume of natural gas with heating value of one dekatherm is about 910 to 1,026 cubic feet (25.8 to 29.1 m3).

How do you convert dekatherms to kilowatt hours?

1 Dekatherm (US):…Please share if you found this tool useful:

Conversions Table
1 Dekatherms (us) to Kilowatt-hours = 293.0011 70 Dekatherms (us) to Kilowatt-hours = 20510.0778
2 Dekatherms (us) to Kilowatt-hours = 586.0022 80 Dekatherms (us) to Kilowatt-hours = 23440.0889

What is a DEC of natural gas?

One gigajoule (GJ) equals one billion joules (J). A gigajoule of natural gas is about 25.5 cubic metres at standard conditions. One gigajoule of natural gas is approximately equivalent to 27 litres of fuel oil, 39 litres of propane, 26 litres of gasoline or 277 kilowatt hours of electricity.

### Is MMBtu the same as MCF?

One thousand cubic feet (Mcf) of natural gas equals 1.037 MMBtu, or 10.37 therms.

### What does mmcfd stand for?

MMCFD

Acronym Definition
MMCFD Million Cubic Feet per Day (energy industry)

What is Mcf unit?

Mcf—the volume of 1,000 cubic feet. MMBtu—1,000,000 British thermal units.

What does mmcf mean?

One million cubic feet
One million cubic feet of gas is instead denoted as MMCF, in which the two Ms mean “one thousand thousand” or 1,000,000, with each M representing three zeros.

#### What is one ton of LNG?

One ton of LNG contains the energy equivalent of about 48 billion cubic feet (48 bcf) of natural gas, or 8.59 million barrels of oil equivalent (mmboe) or 1.17 milllion tons of oil equivalent (mmtoe).

#### What does Mcf mean?

one thousand cubic feet
MCF is an acronym equivalent to one thousand cubic feet that are derived from the Roman numeral M for 1,000, combined with cubic feet (CF) for volumetric determination of natural gas. Consider a well with the capacity to produce 500 MCF per day. The natural gas well’s daily production rate is 500,000 cubic feet.

How do you convert MMBtu to MCF?

The conversion factors below are intended to allow quick conversions between common units of energy….Natural Gas.

Change To Multiply by
MMBtu Mcf 0.9756
MMBtu Bcf 0.000001
MMBtu Dth 1
MMBtu Therm 10

What is Bcf mean?

BCF

Acronym Definition
BCF Billion Cubic Feet
BCF Boating Camping Fishing (Australia)
BCF Bike Chat Forums (UK)
BCF Bioconcentration Factor

## What kind of energy unit is a dekatherm?

(April 2016) ( Learn how and when to remove this template message) A dekatherm ( dth) is a unit of energy used primarily to measure natural gas. It is a combination of the prefix for 10 ( deca, often with the US spelling “deka”) and the energy unit therm.

## How to convert dekatherm to hundred cubic foot of natural gas?

The answer is 0.10304656525666. We assume you are converting between dekatherm and hundred cubic foot of natural gas. You can view more details on each measurement unit: The SI derived unit for energy is the joule. 1 joule is equal to 9.4781608955725E-10 dekatherm, or 9.1979396615158E-9 hundred cubic foot of natural gas.

When was the dekatherm used to measure natural gas?

A dekatherm (dth) is a unit of energy used primarily to measure natural gas, developed in about 1972 by the Texas Eastern Transmission Corporation, a natural gas pipeline company.

When did Texas Eastern start using the unit dekatherm?

The company Texas Eastern Transmission Corporation, a natural gas pipeline company, started to use the unit dekatherm in about 1972. To simplify billing, Texas Eastern staff members coined the term dekatherm and proposed using calorimeters to measure and bill gas delivered to customers in dekatherms.