Should you overexpose ektar 100?

Should you overexpose ektar 100?

This allows it to capture very bright elements in a scene without the blown highlights of digital. In full, direct sun, Ektar still renders a well-exposed image with crisp lines. Credit: Gado Images. Some people even like to overexpose Ektar 100 by a stop, to ensure that their shadows aren’t too dark.

What does 400 mean on Kodak film?

KODAK High Definition 400 Film is the world’s finest grain 400-speed color print film. It provides a unique balance of fine grain, sharpness, color reproduction, and contrast to yield results with excellent clarity and enlargement capability.

Can you push Portra 400?

Portra 400 pushed 1 stop will add some contrast, some slight color shifts, and if you meter correctly the grain shouldn’t be that much more noticeable that when shot at box speed. The pushing or pulling process involves shooting and developing film at a different ISO then what the film is rated for.

Can you shoot ektar 100 at night?

Yes, of course this film can be used for night time and long exposures. By long exposures I mean a shutter speed of more than 1 second. Kodak, Ektar, however has a strong reciprocity factor which means it needs be corrected in terms of STOPS with a MORE time and you may look up the internet for the reciprocity chart.

Should I push or pull Portra 400?

Portra 400 +1 Portra 400 pushed 1 stop will add some contrast, some slight color shifts, and if you meter correctly the grain shouldn’t be that much more noticeable than when shot at box speed. [Pull -1] Pulling color negative film will mute the colors, take away contrast, and increase shadow detail.

Should I push or pull expired film?

Generally speaking, for all ISO 200-400 film that’s been cold stored and expired anything up to 10-20 years, go ahead and shoot your film it at box speed (its native ISO). That covers colour negative, colour slide and black and white negative and slide film.

How do you rate an ektar 100?

Meter it at Box Speed (or thereabouts) Well, Kodak Ektar 100 film not so much. I shoot it at box speed – meaning that its a 100 speed film, so I rate it at 100 on my light meter and meter normally. I hold the meter straight up and down. I might give it a 1/4 or 1/2 stop of over exposure, but no more.

Are there extra stops on Kodak EKTAR 100?

With summer light about to hit the Northern Hemisphere, I thought this would be a good time to share my experiments and thoughts on pushing Kodak Ektar 100 film two extra stops — in other words, shooting it and developing it as if it were ISO 400.

What kind of film is Ektar pushed 2 stops?

In this article, Healy shares images taken with Ektar 100 film, pushed two stops and some non-pushed for comparison. Ektar 100 shot and developed at ISO 400 with a LC-A 120.

What kind of camera do I use for Ektar?

Ektar 100 shot and developed at ISO 400 with a LC-A 120. Portland, Oregon. Early December, 2017. These images were shot from late afternoon (neon sign) to total darkness (bridge with white reflections on water) on the same day. I decided to load each of my LC-As with Ektar 100 and set one of them to ISO 100 and one to ISO 400.

When was the Ektar 100 shot and developed?

Ektar 100 shot and developed at ISO 400 with a LC-A 120. Portland, Oregon. Early December, 2017. Fast forward to December last year, in Portland, Oregon. I shot underexposed Ektar and had it pushed +2 stops on development, on the LC-A 120.

Should you overexpose Ektar 100?

This allows it to capture very bright elements in a scene without the blown highlights of digital. In full, direct sun, Ektar still renders a well-exposed image with crisp lines. Credit: Gado Images. Some people even like to overexpose Ektar 100 by a stop, to ensure that their shadows aren’t too dark.

Can you push Portra 160?

Portra 160 is very forgiving. You will be just fine either leaving it, or requesting a 1/2 stop push at most. I often rate Ektar 100 at 400 or 800 and push 1.5 to 2.5 stops.

How far can you push Portra 400?

There will be noticeable grain and contrast. When it comes pushing up to 3 stops we mostly recommend B&W film. Portra 400 +1 Portra 400 pushed 1 stop will add some contrast, some slight color shifts, and if you meter correctly the grain shouldn’t be that much more noticeable than when shot at box speed.

Can you pull Portra 400?

Portra 400 +1 Portra 400 pushed 1 stop will add some contrast, some slight color shifts, and if you meter correctly the grain shouldn’t be that much more noticeable than when shot at box speed. [Pull -1] Pulling color negative film will mute the colors, take away contrast, and increase shadow detail.

How do you rate an ektar 100?

Meter it at Box Speed (or thereabouts) Well, Kodak Ektar 100 film not so much. I shoot it at box speed – meaning that its a 100 speed film, so I rate it at 100 on my light meter and meter normally. I hold the meter straight up and down. I might give it a 1/4 or 1/2 stop of over exposure, but no more.

How to push Ektar pushed + 2 stops?

I shot two rolls of 120 Ektar, setting the LC-A 120 at 400 iso (instead of the box speed of ISO 100), then asked the lab to push develop it by two stops. The first three images came from those two rolls.

Are there extra stops on Kodak EKTAR 100?

With summer light about to hit the Northern Hemisphere, I thought this would be a good time to share my experiments and thoughts on pushing Kodak Ektar 100 film two extra stops — in other words, shooting it and developing it as if it were ISO 400.

When was EKTAR 100 shot at ISO 400?

Ektar 100 shot and developed at ISO 400 with a LC-A+. Whidbey Island, WA. Late June, 2017, full sunshine. A quick note on what is meant by “pushing film”: If you shoot your film at “box speed” (the ISO stated on the box), you are exposing the film the way it was meant to be exposed.

What kind of camera do I use for Ektar?

Ektar 100 shot and developed at ISO 400 with a LC-A 120. Portland, Oregon. Early December, 2017. These images were shot from late afternoon (neon sign) to total darkness (bridge with white reflections on water) on the same day. I decided to load each of my LC-As with Ektar 100 and set one of them to ISO 100 and one to ISO 400.

Back To Top