What are the cons of a lightweight flywheel?
Cons of Lightweight Flywheels
- Reduced Off-the-Line Performance. If you want to maximize performance from a standing start, a lightweight flywheel might not move you in the right direction.
- Rough Engine Feel. With a lightweight flywheel, the engine will feel rougher while running.
- Gear Rattle.
Does a lightweight flywheel make a difference?
Installing a lightweight flywheel doesn’t decrease torque, but it does decrease inertia, meaning more torque will be needed to break traction with a clutch-kick (drifting or burning out), or to accelerate a vehicle off the line during a launch (drag racing, daily driving).
Is a lightweight flywheel worth it?
The lighter the flywheel, as soon as you hit the clutch, the faster the engine speed will drop. This is a double-edged sword. Not only does it let you shift faster, you must shift faster – and more precisely.
Does a lightweight flywheel increase horsepower?
With a lightweight flywheel, right away you will notice the engine revs more quickly. You free up the horsepower your engine is already making and send it to the rear wheels rather than have it dissipate as parasitic losses. There are other benefits, too.
Is a heavier or lighter flywheel better?
When it comes to choosing the flywheel weight, it is recommended that heavier flywheels are better as compared to lighter ones. Higher the flywheel weight the smoother the operation. A heavy flywheel ensures safe movement by producing more power at a steady rate.
Which is better steel or aluminum flywheel?
With an aluminum flywheel your RPM’s are going to drop a good bit quicker then with a steel flywheel. For some people this makes it a little harder to drive the car around town (or if our wife / gf drives your car). Also aluminum flywheels tend to be more prone to clutch chatter then lightened steel / steel flywheels.
Are heavy flywheels better?
Is a 22lb flywheel good?
When it comes to flywheel weight, I think heavier is the way to go for most of us. It’s a pretty safe bet that an exercise bike with at least a 20 lb flywheel is going to provide a fairly smooth ride.
Are aluminum flywheels worth it?
The lower moment of inertia in the aluminum flywheel provokes an instant response, delivering not only faster acceleration and deceleration, but also suppressing wheel spin. In addition, the component is not very expensive and the installation process not very laborious.
What material is a car flywheel made of?
Material selection Flywheels used in car engines are made of cast or nodular iron, steel or aluminum. Flywheels made from high-strength steel or composites have been proposed for use in vehicle energy storage and braking systems.
Is 15kg flywheel good?
Now, the recommended flywheel weight for indoor bikes is about 18-20kgs, whereas for commercial bikes the weight can be around 20-22kg. This has an incredibly smooth 22kg flywheel, it’s a great commercial bike you can use from home. A bike with a flywheel weight of less than 16kg is not recommended.
What does a heavier flywheel do?
The heavy flywheel helps RPM recovery, allows the engine not to lug during the gear transmission. The light flywheels decrease the inertia, so it gives a quick response to acceleration and deceleration. For this reason, light flywheels are used in the sports car.
What are the advantages of a light weight flywheel?
The advantages of a light weight flywheel are the same as reducing the weight of any part of your drive train, you are going to get a quicker revving engine. This is fantastic once you are moving, because it means you will get to the higher RPMs, where the power is, much quicker.
Are there any safety concerns with flywheels?
There are safety concerns associated with flywheels due to their high speed rotor and the possibility of it breaking loose & releasing all of its energy in an uncontrolled manner 8.
Can a light flywheel cause a stall?
However, the lighter flywheel (sometimes 11 lbs or less!) means as soon as the clutch engages, the clutch, driveshaft, rear end, axles, etc that are at a dead stop can overcome the lower angular momentum of the light flywheel, thus causing a stall. The solution, of course, is very easy, you add more throttle while engaging the clutch.
What’s the down side of a light flywheel?
The down side of this is drivability. A lightweight flywheel means you are going to have to get really good at clutch control really fast. The stock, heavier flywheel (usually 20+ lbs) means you can be pretty liberal with clutch engagement and still not stall.
