What are the regulations for darts?
Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches.
What is the distance regulation for darts?
Dart Board Measurements: Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.
Can you lean forward in darts?
This means that as long as your foot is on or behind the throw line, you can throw from anywhere that measures a minimum of 7 ft 9¼ in from the board. There is no rule that states you cannot lean forward when throwing your dart and some well known professional players certainly make use of this option.
How far should a dartboard be from the wall?
The throwing distance in the game of darts is regulated at 7′ 9.25” | 2.37 m from the oche to the front face of the dartboard. Dartboards must be hung on the wall with the center of the bullseye at 5’8” | 1.73 m from the floor—a height established based on the eye-level of a six foot man.
How far should a woman stand from a dartboard?
The official regulations state that it should be 5 feet, 8 inches (or 1.73 meters) from the ground. The measurements are applicable to both steel-tipped and plastic-tipped darts.
What is the best dart throwing technique?
How to throw
- Take back. The movement where you draw back the dart. Try to move your arm from your elbow so your arm makes a folding fan shaped movement.
- Release. The movement where you release the dart.
- Follow through. The movement where you extend your arm straight after release.
Where should a dart board be placed?
Regulation dartboard height from the floor to the center of the bullseye is 5 feet 8 inches (1.73 meters). This measurement is recognized internationally and remains the same for both electronic and steel tip dartboards. We recommend measuring and mounting the dartboard first before measuring throw line distance.
What’s the legal distance from the face of a dart board?
Regulation distance from the dartboard face is 7′ 9-1/4″ for steel tip darts and 8′ for soft tip darts. or subscribe to Dart Brokers!
How tall should the throwing line be on a dartboard?
Throwing Distance. Regulations of the throwing line, toe line, or oche (all names for the same thing) vary depending on whether you are playing with steel-tip of soft-tip darts. It should be 7 feet 9.25 inches to the front of the dartboard if you are playing with steel-tip darts.
What’s the best way to protect a dartboard?
Laying down a protective surface is also a good idea if you have concrete floors or a different hard surface that could damage your dart tips. The best option for for your dartboard setup is a rubber or vinyl dart mat. These mats are made to protect your dart tips and the floor beneath.
How big does a dart board mats need to be?
These mats are made to protect your dart tips and the floor beneath. Dart mats are typically about 1/4 inch thick, 30″ wide and 10 feet long. They are made to fit within your dartboard throwing area and come printed with pre-measured toe lines for both steel and soft tipped dart distances.
