Where is the WPS button on a centurylink router?
Open a web browser on a device that is connected to the modem, and go to http://192.168.0.1. Select the Wireless Setup menu. Select the WPS option in the left sidebar. Enable WPS.
Where is the WPS button on my modem?
To find the WPS button, you should usually look at the back of your router. However, the placement of the button depends on your device. What if my router doesn’t have a WPS button? If your router doesn’t have a WPS button, you can use the web based set-up with an internet browser to set up your Wi-Fi connection.
How do I turn off WPS on centurylink?
Select the Wireless Setup icon in the main menu.
- If given the choice, select “2.4 GHz” or “5 GHz” in the left sidebar. Some models do not offer this option.
- Select “WPS” in the menu on the left.
- Here you can disable WPS, select the WPS type, and initiate a device to connect to your network.
How do I reset my CenturyLink WiFi?
- Locate the Reset Button. Look for the factory reset button on the back of your modem or router—it’s likely red.
- Use the Reset Button. To initiate the factory reset, press and hold the button for at least 15 seconds.
- Wait. Wait for at least 3-5 minutes for the factory reset to finish.
Why is my internet light red on my CenturyLink modem?
The Internet light will be red if the DSL signal is not detected on the line. A support representative will need to assist you in resolving the line issue. The DSL light will blink green at a faster pace when the CenturyLink signal has been found and modem is attempting to establish a connection.
What are the wireless settings on my CenturyLink modem?
Basic Settings : Enable/disable the wireless radio, change the network name (SSID), view the current security type, key/passphrase, and WPS PIN for the modem 2.4 GHz or 5 GHz Radio Setup: Select the wireless channel, power level, 802.11 modes, spatial streams, aggregation, and MIMO power save
How to configure WPS on your modem?
Configure WPS on your modem WiFi Protected Setup (WPS) provides an easy and secure way to establish a wireless network by sharing the wireless key between your modem and devices. Learn how to connect a device to your WiFi network using WPS.
What happens if my router does not connect to WPS?
The WPS light will continue to flash and the router search for devices for up to 2 minutes. If it doesn’t connect successfully in that time, it will usually reset and you will need to press it again to try a new connection. Are both your router and your device WPS compatible?
What to do if your CenturyLink modem light is still red?
If you don’t know your username and password, try resetting your modem to factory defaults by pressing the reset button for 10 seconds, waiting for the internet light to turn on, then going through the CenturyLink activation process. If the internet light is still red after resetting, contact technical support for help.
