Can recessed lights be used in shower?
Bathroom recessed lighting offers a clean, modern look that blends into the architecture of the bath space. And, unlike regular wall or ceiling mounted light fixtures, recessed bath lights can be installed in shower stalls or over tub areas.
What recessed lights for shower?
MR16 or PAR20 halogen lamps are common for shower recessed lighting, but newer LED retrofit modules on the market enable you to incorporate energy-efficient LED lighting into your bathroom.
Where should recessed lights be placed in shower?
Place task recessed lighting over the vanity or in the shower. (Note: Light fixtures for showers must be wet-rated.) Ambient lighting is usually spread out to mimic natural light. Evenly space ambient recessed fixtures in a line or a grid formation.
Do you need a special light bulb for a shower?
Of course, a light bulb that is compatible with the bathroom and light fixture is critical for a shower light. Traditionally, halogen lamps have been used, but more and more people are opting for LED models for a far more energy efficient lighting system.
Do shower lights need to be GFCI protected?
A. Master electrician Sean Kenney responds: The short answer is yes. Although the NEC does not require either the switch or the light fixture to be GFCI-protected, most lighting fixtures designed for use in a shower stall require GFCI protection to meet UL requirements.
How bright should a shower light be?
There are several factors that will impact how bright you want the lights in your bathroom to be — 75-100 watts go well in guest and master bathrooms. However, for half-baths or powder rooms, 45-60 watts is fine. Later that evening, you can dim to 35 watts for a relaxing bedtime bath.
Are recessed lights out of style?
Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.
What size recessed light for 8ft ceiling?
When spacing recessed lights, use this general rule of thumb: divide the height of the ceiling by two to get the distance the lights should be from one another. For example, an 8-foot tall ceiling should have recessed lights spaced 4-feet apart.
How many lumens does a shower light need?
The Illuminating Engineering Society (IES) Lighting Handbook recommends between 20 and 50 lumens (a measure of light output) per square foot in the bathroom.
Can a light be on a GFCI circuit?
Lights and fans above bathtub sunshowers are required to be GFCI protected. Only receptacle outlets are required to be GFCI protected, however, there is nothing prohibiting additional outlets (such as lighting outlets) from being protected.
How to choose a recessed shower light?
Find a Moisture-Resistant Trim: The most important feature of your new shower light is a “wet location approved” trim.
Can I put a recessed light in a shower?
Four Brilliant Ways to Use Recessed Lighting in Your Bathroom Over the Mirror. When using recessed lights for the bathroom mirror, place the fixtures as close to the plane of the mirror as possible. In Showers and Over Tubs. The shower and tub areas are other locations where it makes sense to use can lights. Bathroom Ambient Lighting. Bathroom Accent Lighting.
What size recessed lights do I Need?
The size and spacing of recessed lights depends completely on your individual space and the effect you want — there’s no universal solution. One general rule of thumb is to place 4-inch lights 4 feet apart and 6-inch lights 6 feet apart.
What type of lights go over the shower?
Of course, a light bulb that is compatible with the bathroom and light fixture is critical for a shower light. Traditionally, halogen lamps have been used, but more and more people are opting for LED models for a far more energy efficient lighting system.
https://www.youtube.com/watch?v=C3n_nJw4Ev8
