What are Spelter sockets?
Molten zinc is standard as the bonding medium surrounding wires inside the socket, but epoxy compound may be specified. Both mediums have same capacity ratings. Steel forgings are used for rope sizes 1/2″ through 4″, and cast steel fittings for larger sizes.
How does a Spelter socket work?
Spelter / Poured Sockets A poured socket, commonly referred to as a spelter socket, attaches a termination fitting onto the end of a wire rope cable by pouring molten zinc or resin into a socket that then hardens and holds the fitting onto the end of the cable.
Which socket when properly installed will be 100 efficient?
spelter sockets
The only fitting which will attain a 100% efficiency are spelter sockets; provided they are properly attached. ALL other fittings are swaged or clamped onto the rope. The swaging or clamping process compresses the rope to varying degrees causing a slight loss of strength.
How do you use Wirelock?
Mix and pour WIRELOCK® within the temperature range of 48 degrees to 110 degrees F. Booster kits are available for reduced temperatures. 2. Pour all the resin into a container containing all the granular compound and mix thoroughly for two (2) minutes with a flat paddle.
What is Wirelock?
WIRELOCK® is the original cold socketing compound for use with wire ropes. WIRELOCK® is the original cold socketing compound for use with wire ropes and eliminates the hazards of working with a molten metal, allowing socketing to be done onsite in virtually all-weather conditions.
Why are wire rope clips installed on wedge sockets?
With regard to the use of a wire rope clip with a wedge socket, please be advised that in applications involving vibration, such as pile driving and clam shell operations, we would agree a wire rope clip may be used to clip the dead end of the rope to the live end to prevent the socket from working loose and the rope …
How does a Swageless fitting work?
Swageless fittings don’t require any form of swaging or crimping. Instead, the fittings features a small one-way locking mechanism. This locking mechanism secures the railing system by allowing cables to enter in only one direction. It then grabs the cable if it is pulled in the opposite direction.
Why should you never saddle a dead horse?
“Never Saddle a Dead Horse” is a common phrase to help people remember the proper orientation to apply the clip. It means to never apply the saddle of the clip to the dead end of the rope. Space the wire rope clip one saddle length from the end of the dead end.
Why do we wire lock?
Lock wire’s central purpose is to prevent the loosening of nuts, bolts, and other fasteners. To wire lock nuts and bolts, you thread it through two or more fasteners, ensuring they remain as secure as possible. Safety wiring prevents the loosening of fasteners by counteracting it with more tightening.
What kind of sockets are used in an open spelter?
G-416 / S-416 Open Spelter Sockets •ged Steel Sockets through 1-1/2”, cast alloy steelFor 1-5/8” through 4”. •Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope.
What is the efficiency rating of a spelter socket?
Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of the wire rope. Ratings are based on recommended use with 6 x 19 – 6 x 41, 1770 or 1960 grade FC or IWRC wire rope. NOTE: All cast steel sockets 40mm and larger are magnetic particle and ultrasonic inspected.
What kind of Spelter is used for mast raising?
Spelter Sockets for Mast Raising Lines in the Oilfield Muncy Spelter sockets are often used for Mast Raising Lines, also called bull lines or bridle lines in the land drilling markets. This application often pairs three (3) open spelter sockets with one (1) closed socket per the two lines.
What kind of socket is Muncy rope spelter?
Muncy Machine has manufactured spelter sockets for decades. Originally furnishing sockets designed for strand, Muncy added its R-Series line for the more industry-standard sockets dimensionally compliant with the RR-S-550 federal specifications.
