How much HP can a TKO 600 handle?
Registered. They have said it needs to be cyro hardened. Then everything is polished. Rated to 1000 hp.
What vehicle has TKO 600?
The TKO-600 became available in 2003. The 3 vehicles that had a Tremec 3550 was 1993 Cobra-R, 1994 & 1995 Cobra-R. They were not production cars but assembled for Ford. A REAL SPEED SHOP with parts, price & knowledge….
How much does a Tremec TKO cost?
It offers up to 600 lb-ft of torque capacity, 6,200 rpm shifts and a ton of swap-friendly features, including multiple shifter locations and optional overdrive ratios. Available for under $3,000 and benefitting from unrivaled aftermarket support, the TKO is the value-packed choice of manual hot-rodders everywhere.
What is the difference between a TKO 500 and a TKO 600?
The difference between the 500 and 600 is the gear ratios. The 500 has a 3.27 first gear, the 600 has a 2.87. Less gear multiplication allows more torque input. The closer ratios have less rpm drop between gears which will suit an engine with a narrow power band.
How much power can a TKO handle?
The TKO 5-speed is an early top-loader–style transmission rated for up to 600 lb-ft of torque capacity, and it can be reliably shifted at engine speeds up to 6,200 rpm.
How much does a Tremec TKO 600 weigh?
TREMEC TKO-500 / TKO-600….Features & Benefits:
| TREMEC Part Number | TCET4617 |
|---|---|
| Weight (lbs) | 105 |
| Torque Cap. (lbs-ft) | 600 |
| Gear Ratio Chart | 2.87 |
| 1.89 |
What is the best Tremec transmission?
Tremec TKO 5-speed
The Tremec TKO 5-speed is the transmission that started a revolution in manual overdrive conversions. It is one of the most versatile 5-speed transmissions in the market today, as well as one of the strongest. With an impressive 600 lbs./ft.
What does a TKO 500 weigh?
105 pounds
All TKO transmissions are 31¼ inches long and weigh 105 pounds. They are equipped with an internal three-rail shift system and cast-iron shift forks. Heavy-duty tapered roller bearings on the input, counter and output shafts reduce noise and improve the TKO’s transmission performance.
How do I know if I have a TKO 600?
To externally see if it is a TKO-600 you would put it into first gear and count the input shaft rotations needed to generate one output shaft rotation. If it takes a little MORE than 3 turns, it is a 3.27 first gear. If it takes a little LESS than 3 turns, it is a 2.87 first gear.
How much does a Mopar TKX 5 speed kit cost?
Starting prices range from $3600-$4400 depending on body style. Call us at 931-646-4836 for a custom quote for your application. Multiple shifter locations & dual speedo pick-ups for extreme versatility
What kind of pilot bearing does a Mopar TKX use?
Conversion Pilot Bearing – Works in manual and automatic cranks Conversion Release Bearing – Compatible with OE clutch fork, Hardware, Complete Instructions and Industry Leading Warranty, NOTE: Requires engine specific bell housing. Specify console or non-console when ordering.
How many shift locations does a TKO have?
The TKO series has 3 different shift locations available and is also equipped with the ability to give you a mechanical or electronic speedometer output, built-in neutral safety and reverse light switches.
Is the Tremec TKX a 5 speed transmission?
The Tremec TKX series of 5-speed transmissions are a great way to add an overdrive transmission to your project.
