How much horsepower can you get out of a 318?
It can easily make 400 plus horsepower and still has great street manners. If you’re building for fuel economy, the 318 beats the Mopar 340 and 360, hands down. The 318 was produced in three versions: polysphere, LA series, and Magnum.
What is a 318 big block?
At first,there is no “big block 318″.(correct name is either 318-A Poly, or 318-A Wide-block) used up to 1966. Folks just started to call the old 318 ” bigblock” when the new light version,( 318 LA ) came in 1967. Another way to tell the difference between them is how the valve-covers is bolted.
Is the 318 a good engine?
The Good And The BadIn terms of durability, the Mopar 318 is robust. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.
Are 318 and 360 blocks the same?
Nope, not the same. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
Can you supercharge a 318 engine?
1) Yes, we could exceed the 500” strokers power & torque. 2) Properly built, the 318 block will handle a forced induction system, supercharger or turbo, that puts out 597 HP @ 6000 and 535 lbs/ft torque between 4500/5000 RPM on a rear wheel dyno.
Will 340 heads fit a 318?
The problem with all the 340/360 heads on a 318 is the chamber measures about 70 cc, which will drop the compression to an unworkable low ratio on a 318. You can forget about decent performance with these heads and the stock pistons, so again, a set of moderately priced aftermarket pistons is the answer.
When did dodge stop making the 318?
Magnum 318 The Magnum, which was used in Dodge trucks, was a better engineered and more efficient engine. But by 2002, the 318 was dropped in favor of the 360 that remained as the only high-powered optional engine for the Dodge pickups.
Are all 318 blocks the same?
from Sierra Vista AZ. the poly (thru 1966) and wedge (67-up) 318 bare blocks are the same size, you’d be hard pressed to tell them apart just looking at them. But, the poly heads are shaped differently so they stick out the sides further, that’s how it got the name “wide block”.
Can you put 340 heads on a 318?
The 2.02 valves on a 340 head are complete overkill on a 318 unless you are running it constantly in the higher rpm’s. The larger valves can actually hurt your low end.
How does centrifugal supercharger work?
A centrifugal supercharger is driven by the engine itself. A pulley attached to the engine spins a belt that in turn spins the supercharger. The impeller on the supercharger then sucks in air through an air filter. A bit of piping then feeds that air either into an intercooler or straight into the engine.
How do you turn a 318 into a 340?
to achieve 340 cubics with a 318 you will need a stroker crank. yep, to get up to 340 with a 318 you’ll need a stroker kit. around 1500$ or more for a kit with everything you need, including the crank, bearings, pistons, rings, and connecting rods. Get a 360!
