How do you focus Meade ETX?
The ETX-60AT and ETX-70AT telescopes can be focused on objects from a distance of about 17 ft. to infinity. Rotate the focus knob clockwise to focus on distant objects, and counterclockwise to focus on nearby objects.
How do you set up a Meade Autostar telescope?
Point the telescope at the selected object and center it in the eyepiece. Press MODE until the main menu is displayed (“Select Item:”). Press a SCROLL key until “Setup” is on the bottom line, then press ENTER.
How do you focus a Meade ETX 90 telescope?
The focus knob is attached with a small allen screw to a rod that sticks out the back of the scope. When you turn the knob it moves the mirror to focus the scope.
How much does the Meade ETX 125 telescope cost?
The Meade ETX 125 telescope costs approx. $700 and comes with a 1-year guarantee. While you can’t exactly call the price low-cost, it is definitely accessible to the majority of users. It is also one of the most competitive ones for telescopes with similar features out there.
Which is better Meade ETX 80 or ETX 125?
Meade ETX 125 is a major improvement over ETX 80 and ETX 90, but the improvement is costly. There are two major problems with the cheaper ETX models. The first one is the plastic motors that are prone to breaking down and noisy. The second one is the flimsy, cheap, aluminium tripod.
What kind of refractor does Meade ETX EC use?
This new telescope by meade became a huge success for the company, which in turn led to them spawning a whole plethora of devices within the ETX line. The next spawn was the ETX EC (aka electronic controller) line in 1999 which came with its own electronic controller and used 60mm and 70mm refractors and a 105mm Maksutov.
How to set ETX 90-125 telescope on tripod?
ETX 90/125 USERS ONLY:Remove the end nut from the spreader shaft and slide the spreader in between the telescope legs. Attach the end nut and hand tighten until the telescope legs are held snuggly in the most spread position. Position the tripod where you want the telescope to be and check that the top of the tripod is approximately level.