What class combine is a 9870?

What class combine is a 9870?

Class VIII combine
John Deere’s largest combine, the 9870 STS, is a Class VIII combine that can hold 350 bu. of grain.

How much horsepower does a 9870 have?

9870 STS™ powerful John Deere engines. PowerTech™ Plus 13.5L is base equipment for the 9870 STS™ Combines. The 9870 STS PowerTech™ Plus rated horsepower is 440 and features a Power Bulge of 471 hp and an unloading Power Boost up to 473 hp.

How tall is a 9870 combine?

Grain Handling

Grain Tank Capacity 300.9 bu
Unloading Auger Length 22.5 ft (7 m)
Unloading Discharge Height 14.4 ft (4 m)
Unloading Speed 3.3 bu/sec

How do you combine buckwheat?

Combine settings for buckwheat vary by machine, but general guidelines are to set fan speed around 600 rpm, with a maximum of 700 rpm. Cylinder speed should be at 400 to 500 rpm, in some cases up to 600 rpm.

How does a combine thresh grain?

Conventional style combines thresh the crops by passing the cut crops through a chamber that depends on agitation to separate the grain and chaff. Gravity then takes the heavier grain and drops it into its own chute.

What does a concave do on a combine?

The combine concave performs two important functions- threshing and separating. The threshing process frees the seeds from the plants. Then the separation process moves the seeds away from the chaff.

Is the John Deere 9870 combine a good car?

The cab of the John Deere 9870 combine is quite luxurious and yet functional. With excellent control facilities and all-round visibility, the operator would find the vehicle easy and comfortable to handle. The seats are smooth and air ride type adding to the conducive environment and convenience of a high order.

What’s the best way to adjust a combine?

When adjusting your combine the initial combine settings should be as follows: ” Cylinder the highest setting. ” Concave the smallest setting. ” Pre-cleaner the smallest setting. ” Chaffer sieve the largest opening. ” Tailings sieve mid range.

How to adjust combine speed for canola in Alberta?

In one example, Hill said increasing the combine speed to five miles an hour from four would save $160 on 150 acres of canola and cut the combining time by two hours. However, if that extra one-mile per hour resulted in half a bushel loss per acre, the farmer would forego $750 for a net loss of $120 based on canola priced at $10 a bushel.

What are the starting settings for a legacy combine?

Below are some Corn and Soybean suggested starting settings for 88, 130, 140, 150 and Legacy Combines (1600,2100,2300,2500 models) These are great machines and are […] Please note that there are PAGE ARROWS at the bottom to go to […]

Back To Top