Why is my GE washing machine not filling up with water?

Why is my GE washing machine not filling up with water?

If your GE washer doesn’t fill, first confirm if the household water supply is on, then inspect the cold and hot faucets to ensure they are both fully functional. Low water pressure, failed inlet valves, temperature selector switch issues, and water-level pressure switch may be some perpetrators.

How do I get my GE washer to fill up?

There are two ways Deep Fill can be used:

  1. Add a little more water: Press the Deep Fill button once before starting the cycle to add 3 gallons of water to the wash load.
  2. Full Tub Fill: Press and hold the Deep Fill button for 3 seconds to fill the washer to the maximum water level.

Why isn’t my washer filling up with water?

If your washer doesn’t fill with water, first check that the house water supply to the washer is on. If it is, and the washer won’t fill at all, the inlet valves might have failed. If the washer fills partially, the problem is likely with the temperature selector switch or water-level pressure switch.

How do you fix a GE washer that won’t fill?

Machine Won’t Fill Check the fill hoses, which connect to the upper back left of most GE washers, and make sure the line has no kinks. If the problem persists, turn off the water and remove the fill hoses. Check the filter screen inside the hoses, and clean them with a brush or toothpick.

How do I troubleshoot my GE washing machine?

How to Troubleshoot a GE Top Load Washer

  1. Check the amount of detergent you have put in the washer.
  2. Examine the GE top load washer’s drain hose for leaks.
  3. Check the water connections to your GE top load washer.
  4. Check whether the GE top load washer lid is closing firmly.
  5. Check the load in your GE top loading washer.

Why does my GE washer keep saying H2O supply?

If the Fill light is flashing or H2O SUPPLY is scrolling on the display (2015 and newer models), the washer will initiate a 3 or 4 minute lock-out period (depending on the model). The washer controls won’t respond or change during this time. Unplugging the washer will start the 3 or 4 minute lock-out period again.

What are some common problems with ge top load washers?

Water flow issues are among the more common problems in GE washing machines, and they are generally easy to fix. If your washer won’t fill, check the hot and cold faucets to make sure they’re both turned on fully. GE washers require water pressure between 10 and 120 pounds per square inch.

Why does GE washing machine not spin?

One of the most common reasons why your washing machine has stopped spinning is when it can’t drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.

Why does GE washer not spin?

If your GE front load washer won’t spin or tumble you may have a problem with the inverter or motor. If this is the case, you will see a motor or inverter error code. On these GE front load washer models these three errors are motor errors and can be caused by a bad inverter or motor.

Back To Top