How do I reset my Weighmax digital scale?

How do I reset my Weighmax digital scale?

How do I reset my Weighmax scale?

  1. First wash the scale with water and then use acetone or ethanol. Allow the scale to completely dry, normally about 20 minutes.
  2. Take the batteries out of the scale for twenty seconds to reset the scale. Put the batteries back in and try to weigh yourself normally.
  3. Simple.

How do you fix a Weighmax scale?

Calibrating the Scale Place the scale on a flat surface in a room at normal room temperature. Turn on the scale. Wait until the scale reads 0. Press and hold the calibrate key, which is marked “CAL.” Wait until “CAL” is displayed on the LCD screen.

Can you calibrate a digital scale?

You should calibrate your scale about every 4-5 times you use it, to ensure you are getting accurate readings. You can calibrate your digital pocket scale by cleaning it and following the calibration steps using weights, coins, or household objects.

How many nickels do you need to calibrate a scale?

There’s a fairly common rumour floating around that encourages using a nickel to calibrate a scale. According to the US Mint, a nickel weighs exactly 5.000 grams. The idea is that you can combine however many nickels needed to reach the scale’s capacity (i.e. for a 100 gram scale, you would need 20 nickels).

How do you fix a scale that won’t turn on?

Remove the new batteries and inspect the terminals for any corrosion left by the previous batteries. Take a small piece of sandpaper and lightly sand the contacts in the battery compartment, reinstall the new batteries and try powering the scale on again.

How do you know if my scale is broken?

5 Signs You Need to Replace Your Scales

  1. Inconsistent Scale Readings: This is one of the more obvious signs that your scale may need to be replaced.
  2. Inaccurate Readings Between Scales:
  3. Unstable Readings:
  4. Display Readability:
  5. Rust or Other Corrosive Damage:

How do I fix scale error?

Batt error message

  1. Remove old batteries from the back of the scale.
  2. Insert 4 new AA batteries. The scale manufacturer recommends using Duracell batteries.
  3. Wake the scale before weighing in again.
  4. Once you’ve weighed in, the scale should display “sent”.
  5. Navigate to your Progress Page to view your weight chart.

Why is my scale not accurate?

#1 Every time a digital scale is moved it needs to be calibrated. Initializing the scale resets the internal parts allowing the scale to find the correct “zero” weight and ensure accurate readings. If the scale is moved and you do NOT calibrate it, you are likely to see fluctuations in your weight.

Where can I get a weighmax bathroom scale?

Our knowledgeable Technical Support teams are standing by to help you with any technical problems. Please e-mail us at: [email protected] WeighMax Group: 14780 Central Ave. Chino, CA 91710 Tel: 909-597-0100 Fax: 909-597-0118 Office Hours: Monday-Friday from 9:00 AM to 5:00 PM (PST)

Which is the most popular weighmax pocket scale?

Most popular products W-2820 / 6kg Plastic Platform W-2820-6KG W-HD650 Digital Pocket Scale • Capacity: 650g • Luminescent backlight LCD display • Large Stainless steel platform • Low battery and overload indication W-4819 Mailing Post Scale

Do you need JavaScript to use

JavaScript seem to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website. Online Support Chat Wholesale & Distributor Login:

How big is a w-4819 mailing post scale?

W-4819 Mailing Post Scale • Capacity: 35lb, 55lb, 75lb • Adjustable measuring units in kg and lb • With large weighing platform • Auto shut-off feature W-2810 Kitchen/Cooking Weigh Scale • Capacity: 4.4lb or 11lb • Adjust measuring units in kg and lb

Back To Top