How do I update my ScreenBeam firmware?
Open the main ScreenBeam software window and locate the name of your receiver. Right-click the receiver name, and then select Check for updates… In the Check for ScreenBeam Updates window, you will be notified if an update is available. If an update is available, click the Update Now button.
Why is my ScreenBeam not working?
Reboot both the ScreenBeam Mini 2 and your device and try the connection again. If you are using Windows 8.1, go to Change PC settings > PC and Devices > Devices > Projectors, remove the profile of ScreenBeam Mini 2 from your device (PC/laptop/Ultrabook), and then try connecting to ScreenBeam again.
How do I update my ScreenBeam Mini 2?
How Can I Update the Firmware on my ScreenBeam Mini 2?
- Open the ScreenBeam Configuration Utility app.
- If you are using Windows, select Wireless Setup.
- The app will scan for ScreenBeam receivers.
- The app will connect to your ScreenBeam Mini 2.
- In Windows, select Firmware Update from the left-hand column.
Why does my ScreenBeam Mini 2 keep disconnecting?
Make sure your ScreenBeam Mini 2 and all its cables are securely connected, as shown in the diagram. If this problem persists, connect the USB power cable to the provided A/C power adapter (Recommended method). Some USB ports on certain TVs may not supply enough power to properly operate ScreenBeam Mini 2.
How do I reset my ScreenBeam 960?
To restore the Receiver’s default factory settings: 1. Power on the Receiver, and wait until the “Ready to Connect” screen appears. 2. Hold down the Receiver’s “Reset” button with a pin.
How do I connect my Iphone to ScreenBeam?
Connect iOS Device To ScreenBeam
- Make sure your iOS device is connected to the same network as your ScreenBeam receiver.
- Swipe down from the top right corner of your iOS device to bring up the Action Center menu. Select Screen Mirroring.
- A list of available devices will appear.
- A PIN entry box will appear.
How do I turn off screen beam?
There is no way to turn off the ScreenBeam without unplugging the receiver. You can set the ScreenBeam to Auto-reboot after a period of inactivity. This setting can be found on the Features tab on both the LMI and in CMS.
How do I reset my Actiontec ScreenBeam?
Restore Default Settings
- Power on ScreenBeam Pro and wait until the “Ready to Connect” screen appears.
- Hold down ScreenBeam Pro’s “Reset” button with the end of a paper clip.
- When the “Reset to Default” screen appears on the HDTV, release the Reset.
How to update the firmware for my ScreenBeam receiver?
This article applies to the following ScreenBeam products: Please sign-in to view the release notes. Follow the instructions in our firmware update guide to update the firmware of your receiver. How do I update the firmware for my receiver?
What is the latest version of ScreenBeam 960?
ScreenBeam 960 Firmware: Version 9.15.44.0 (January 15, 2020) Version 9.15.43.0 (October 15, 2019) Version 9.15.42.0 (May 22, 2019)
How do I update firmware for my Receiver?
Please sign-in to view the release notes. Follow the instructions in our firmware update guide to update the firmware of your receiver. How do I update the firmware for my receiver?
