How do I use Geofix?
Application
- Wet the paving surface.
- Carefully open the vacuum –packed bag and sprinkle GEO-fix® All Weather Jointing Compound over the area to be jointed.
- After application brush off the excess with a soft brush, taking care not to brush any out of the joints.
What is jointing compound paving?
Jointing Compound is a type of patio grout which is the perfect finishing touch for any project involving laying outside tiles, slabs and paving stones. This paving grout can be applied to existing exterior floorings or used when installing a new feature.
Can you use Geofix on block paving?
Suitable for footpaths, flagstones, block paving, outdoor patio areas, indoor stone floor areas, pedestrian areas and driveways. Geofix can be used in areas subject to light vehicle traffic.
Is Sika jointing compound any good?
5.0 out of 5 stars It’s A Doddle. Simple to use and it does exactly what it says and worked great on these large gaps. I chased out the old mortar between the sandstone slabs, removed all the loose material, wet the joint areas and brushed it in then tamped in down to make sure it was solid.
Does patio jointing compound set hard?
Best resin paving joint compounds All round this is a great product which is easy to install, sets rock hard and comes in some nice colours. It works on all types of paving and doesn’t seem to leave a residue.
What do you use to fill gaps in block paving?
Refill the joints between block pavers with jointing sand – any existing sand is likely to have washed away during cleaning. Brush a thin layer of jointing sand over the whole area and sweep into the joints. Work the broom back and forth to fill all joints.
How long does patio joint compound take to dry?
In dry summer conditions it will take around 72 hours for the compound to be completely set and for the patio to be ready for use. If you’re experiencing very wet or cold conditions, the product should be given a full 28 days to totally harden.
What kind of jointing is Geo fix for?
Geo-Fix All Weather Jointing Compound is a quick and easy way of applying a rigid joint on most common paving types including Natural Stone, Concrete, Slate, Clay, Terracotta and Granite.
Do you have to mix sand with Geo fix?
deeper joints can be filled with dry sand or other materials to meet the required minimum depth. GEO-FIX is supplied ready to use and does not require any further mixing or addition of other materials. Wet the paving surface. The paving must be kept wet during application but free from standing water.
What are the benefits of Geo fix all weather?
Geo-Fix® All Weather offers huge time saving benefits compared to applying traditional mortar. Unlike mortar joints Geo-Fix® All Weather is totally resistant to freeze-thaw cycles and will not crack or pop out with frost.
What’s the difference between Geo fix and traditional mortar?
Geo-Fix® Original is ready mixed and can simply be brushed into joints with minimal effort compared to using traditional mortar. Our product is easily finished by compacting with a pointing tool saving valuable time compared to traditional wet pointing. Geo-Fix® Original offers huge time saving benefits compared to applying traditional mortar.
