How do you factory reset a Cisco phone?

How do you factory reset a Cisco phone?

Cisco 7940 / 7960 phone Factory Reset: Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash. If you repeat a key within the sequence, eg: 1223456789*0#, it is still accepted and the phone resets.

How do I reset my Cisco 7940 phone?

Press and hold the # (Pound/Hashtag) key and plug the Ethernet & power cable back in. Press in order 123456789*0# to begin the reset sequence. If entered correctly, it will ask if you would like to save the network config which you will select No (option 2) and it will then continue with the reset accordingly.

How do you use a Cisco IP Phone 7942?

  1. Use one of the following methods to place a call: • Lift the handset and dial the number.
  2. Dial the number, and then lift the handset.
  3. Press the line button for your extension, and then dial.
  4. Press the New Call soft key, and then dial.
  5. Dial the number, and then press the Headset button.

How do I reset my Cisco 8841?

8841/8851 series desk IP phone

  1. Unplug the Ethernet cable from your Cisco IP phone. Wait 5 seconds.
  2. Plug the Ethernet cord into your phone.
  3. The Mute button will light up.
  4. The main phone screen will appear.
  5. Press the Settings (gear) button -> Admins Settings -> Reset Settings -> All Settings.

How do I reset my Cisco pin?

From Cisco Webex Settings, go to My Profile, click More , and choose Reset Voicemail PIN. You can reset your voicemail PIN on your phone.

How do I troubleshoot my Cisco IP Phone?

General Troubleshooting Sequence:

  1. Disable DHCP and DNS to Test a Phone.
  2. Check for the Incorrect MAC Address on the Phone Label.
  3. Cisco CallManager and TFTP Services Do Not Run.
  4. Delete and Recreate a Phone.
  5. Understand a Network Trace File.
  6. Use Performance Monitor to Analyze Phone Activity.

How much power does a Cisco IP phone use?

Cisco IP phones are power efficient and require 6.3W maximum power as reflected within the pre-standard Power over Ethernet implementation.

How do I turn off the red light on my Cisco phone?

Once you have listened to your messages you can follow the voice prompts to delete the messages which will then remove the solid red light on the phone.

How do I reset my Cisco 8851?

Back To Top