What are Cisco network modules?
Cisco IP VSAT Satellite WAN Module. Cisco MGX 8850 Route Processor Module. Cisco NAC Network Module for Integrated Services Routers. Cisco Virtual Private Network Module. Cisco Wide Area Application Services (WAAS) Modules for ISR.
What are modules in router?
A router module is a critical component of any network infrastructure, especially for companies with multiple control hubs or internal networks. Computer router modules do the extremely difficult chore of routing traffic like a traffic light through the best pathways.
How many ports are there on a Cisco router?
The Cisco 1811 and Cisco 1812 routers offer an 8-port 10/100Base-T switch, dual 10/100Base-T WAN ports, two USB 2.0 ports, and either an ISDN S/T or an analog modem port.
What does a network interface module do?
The Network Interface Module (NIM) / Building Controller can run on a Windows 7 Embedded machine and provides a service that processes all events and access transactions received from doors, turnstiles, time clocks and related field devices.
Do I need Cisco EAP-FAST module?
The Cisco EAP-FAST module is recognized by Cisco Systems’ own label, which is easily used to organize the 802.1X Extensible Authentication Protocol (EAP) for users or organizations that cannot implement strong password policies and do not need to use their certificates.
What is Cisco PEAP Module?
Cisco EAP-FAST Module is an Authentication via Secure Tunneling (EAP-FAST), an EAP type from Cisco Systems. Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST) is a publicly accessible IEEE 802.1X EAP type developed by Cisco Systems.
What are the CCNA modules?
- CCNA 1: Introduction to Networks. Module 1 introduces the architecture, structure, functions, components, and models of the Internet and other computer networks.
- CCNA 2: Routing and Switching Essentials.
- CCNA 3: Scaling Networks.
- CCNA 4: Connecting Networks.
How do I add a module to my router?
In Cisco Packet Tracer, to add modules to your Cisco Router, go to Physical Tab and under Modules Tab, you will see the available modules. If you want to add the module, you just have to drag and drop the modules into the available slot.
How many interfaces can a router have?
An IP address is assigned to each of the router’s two “interfaces”. The first router interface is called the WAN (Wide Area Network) interface. This is the side of the router that faces the Internet and has a public IP address. The second router interface is called the LAN (Local Area Network) interface.
How many ports a router can have?
LAN ports: A home router usually has four LAN ports, meaning that, straight out of the box, it can host a network of up to four wired networking devices. If you want to have a larger network, you will need to resort to a switch (or a hub), which adds more LAN ports to the router.
What is network module?
A network module is a software module that implements a specific function in a network stack, such as a data link interface, a transport protocol, or a network application. A network module can be a provider module, a client module, or both, depending on where it is located in the network stack.
What are the Cisco products?
Products by technology
- Software-defined networking.
- Cisco Silicon One.
- Network management.
- Interfaces and modules.
- Optical networking.
What kind of power supply does a Cisco 3725 router have?
Cisco 3725 routers have a single -48-V supply. Cisco 3725 routers do not report any power supply status. The only software indication of -48-V status is the -48-V status bit provided on the 16-port Ethernet switch network module board.
Is the Cisco 3725 compatible with iOS 12.2?
Table 3 displays the memory recommendations of the Cisco IOS feature sets for the Cisco 3725 and Cisco 3745 modular access routers for Cisco IOS Release 12.2 (15)ZJ5. Table 3 Cisco Release 12.2 (15)ZJ5 Memory Recommendations for the Cisco 3725 and Cisco 3745 Routers
How many independent signals does a Cisco 3745 router have?
• The Cisco 3745 router main board has four independent signals to indicate status on both internal power supplies. Changes on the state of any of these four signals interrupts the main processor on the Cisco 3745 router so software can take the appropriate action. Cisco 3725 routers have a single -48-V supply.
What should I know about the Cisco 2691 3725 router?
The section “Secure Operation of the Cisco 2691, 3725, and 3745 Routers” specifically addresses the required configuration for the FIPS-mode of operation.