What pliers are used for cutting wire and small pins?
Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.
Are wire cutters the same as pliers?
Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.
What is the best tool to cut wire?
The Best Wire Cutter
- Our pick. Channellock E337CB Diagonal Cutting Plier. Strong cuts, comfy grips.
- Budget pick. IRWIN VISE-GRIP Diagonal Cutting Pliers, 6-Inch (2078306) Quality at a bargain.
- Also great. Bahco 2101G-180 Ergo Cutting Pliers. Great features, not as strong.
- Also great. Klein 11054 Wire Stripper-Cutter.
What can I use if I don’t have a wire cutter?
It’s possible to use a hacksaw to cut wire if no cutter is available. You’ll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.
What is another name for wire cutters?
Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).
Can you use pliers to cut wire?
Do not use pliers as a hammer. Do not hammer on pliers or wire cutters to cut wires or bolts. Do not extend the length of handles to gain greater leverage. Use a larger pair of pliers for gripping or a bolt cutter for cutting.
Can you cut wire with pliers?
What can I use instead of a wire cutter?
Here are a few alternative methods that you can use to cut or break wiring on a job without using wire cutters.
- 1 – Bend it. If the wiring in question is on the thinner side and relatively pliable, you could try bending it.
- 2 – Hacksaw.
- 3 – Tin Snips.
- 4 – Reciprocating Saw.
- 5 – Angle Grinder.
What are normal pliers called?
Ordinary (holding/squeezing) pliers may incorporate a small pair of such cutting blades. Pincers are a similar tool with a different type of head used for cutting and pulling, rather than squeezing. Tools designed for safely handling hot objects are usually called tongs.
