Where is the water level switch on a GE washer?

Where is the water level switch on a GE washer?

Look for the round water level switch on the left side of the metal brace. A small clear plastic tube attaches to the left side of the switch. Pull the tube from the side of the switch.

How do I adjust the water level in my washing machine?

If you are having troubles with the water level in your machine, adjust the water level switch.

  1. Unplug the unit from the wall.
  2. Remove the screws from the control panel.
  3. Find the back of the water level switch.
  4. Pull the wires off the water level switch to expose the connectors.
  5. Follow the tube down the outer tub.

Why is my GE washer not filling up with water?

If your washer won’t fill, check the hot and cold faucets to make sure they’re both turned on fully. Check the fill hoses, which connect to the upper back left of most GE washers, and make sure the line has no kinks. If the problem persists, turn off the water and remove the fill hoses.

Why is my GE washer overflowing?

Common solutions for: GE Washer overflowing The pressure switch shuts off power to the water inlet valve when the proper water level is reached. If the pressure switch fails, the water inlet valve will continue to fill the washer tub with water, causing the washer to overflow.

Why is my GE washer not filling up all the way?

Why does my washing machine not fill up all the way?

If your washer doesn’t fill with water, first check that the house water supply to the washer is on. If it is, and the washer won’t fill at all, the inlet valves might have failed. If the washer fills partially, the problem is likely with the temperature selector switch or water-level pressure switch.

Where is the water level switch on a washing machine?

The water level switch (aka pressure switch) senses the water level in the wash tub. It does this through a plastic tube which runs from the switch in the control console down to the side of the outer tub, near the bottom .

How does a washing machine water level sensor work?

Water Level Switch Function The water level switch sends power from the timer control to the water inlet valve and the temperature switch each time the tub needs to be filled during a wash cycle. The switch then signals the motor to begin agitating.

Where is the water level switch?

A water level control (WLC) or pressure switch is usually mounted inside the control console directly behind the knob for setting it.

How does a washer water level switch work?

How does the water level switch work on a washing machine?

As the washer fills, water enters the tube from the bottom and increases pressure in the airspace within the tube. When the pressure reaches the critical point, the switch shuts off water flow to the tub.

How do you test the water level on a washing machine?

Inspect the water level tube and, if necessary, clear any blockage before testing the switch for electrical failure. Always unplug the machine from the wall outlet before doing any inspection or working on your washing machine. Find and inspect the tube that leads from the bottom of the water level switch to the bottom of the tub.

Can a faulty water switch cause a washing machine to go bad?

Your washing machine has some internal switches that control various functions, and any one of them may go bad and require replacement. A faulty water level or pressure switch is one such device.

Who is the plumber for my washing machine?

Richard Epstein is a licensed master plumber with over 40 years experience in residential and commercial plumbing. Your washing machine has some internal switches that control various functions, and any one of them may go bad and require replacement.

Back To Top