How can I improve my plasma cut quality guide?

How can I improve my plasma cut quality guide?

How to improve your CNC Plasma Cut Quality (tips & tricks)

  1. Air Quality – Having clean, dry, oil free air is a must.
  2. Torch Height – Both for pierce and cut, ensuring that the machine maintains the correct height at all times is critical.
  3. Cut Direction – Ya that’s a thing.

What PSI should my plasma cutter be?

For the majority of the Everlast product line, air pressure required to operate the torches is anywhere between 55 to 70 psi. Low amperage cuts will require less air pressure for more stable operation, sometimes down to 45 psi or so, or the arc will be blown out.

How long should a plasma tip last?

Usually, in normal conditions, we can say that the electrode will wear out first during machine cutting. Typical life time of a set of consumable should last about 1 to 3 hours for about 120 A of mechanized cutting, it’s in function of the job. Cutting at lower current may gets longer consumable life.

What do you wear when using a plasma cutter?

Proper plasma safety requires protecting your eyes, face, and your exposed skin. You need to shield your eyes and face with proper plasma cutting glasses, goggles, and/or helmet. You also need to wear a welding gloves, welding jacket, or any clothing that is flame-resistant just like denim.

How long do consumables last on a plasma cutter?

How to increase plasma cutting performance?

Improve cut quality on metal with these plasma cutting tips Is the plasma arc cutting in the appropriate direction? The squarest cut angles are always to the right side, with respect to the forward motion of the torch. Was the correct process selected for the material and thickness being cut? Refer to the cut charts in the Operation section of the Hypertherm Instruction Manual. Are the consumables worn?

What are the uses of a plasma cutter?

Plasma Cutter Uses Artwork. Metal artists often use plasma cutters to make precise cuts in their metal artwork. Contractor and Trade Work. Many plasma cutters are small and portable so contractors and trade workers can use plasma cutters in the field, saving significant time and costs. Metal Repairs. Demolition and Recycling. CNC Plasma Cutting. Other Uses.

How thick can a plasma cutter cut?

Handheld plasma cutters have a capacity of cutting steel plates which are 38 MM thick while some of the better torches which are computer-controlled have the ability to cut steel which is 6 inches thick.

How a plasma cutter is essential for Your Workshop?

Plasma cutters can be a useful additions to a workshop. Firstly, it is one of the quickest ways to cut any material that conducts electricity. This is because no preheating is necessary. When you switch on the torch, you can start cutting immediately. Torches are also versatile and precise.

Back To Top