How do I reset my Explorer 8300 cable box?
How to Reset an Explorer 8300HD Cable Box
- Press and hold the “Volume Up” and “Volume Down” buttons on the front of the unit.
- Press the “Info” button.
- Release the buttons when the HD8300 begins to reboot.
- Switch the HD8300 off by pressing the “Power” button.
- Unplug the HD8300 and wait another 5 seconds.
How to reset scientific atlanta cable box?
Reboot your receiver by unplugging the power cord from the back of the box. Wait 60 seconds and then plug the power cord back in. Wait up to 20 minutes for the receiver to fully recover and turn it back on.
How to reset scientific american cable box?
Turn off the cable box with your power button if possible. Disconnect the power cable from the back of the device. Wait 30-60 seconds and then reconnect the power cable. Once the box finishes restarting, you will have to press the power button to use the device.
What is a Scientific Atlanta box?
Scientific Atlanta is a supplier of transmission networks for broadband access to the home, set-top cable boxes, cable modems and digital interactive subscriber systems for video, high-speed Internet, voice over IP (VoIP) networks, and worldwide customer service and support.
How do I reset my Explorer 8642hdc?
Press and hold power and select on the front of the box. Unplug the power. Keep holding power and select. Plug the power back in.
Why will my cable box not reboot?
Reboots will often solve issues by resetting the box and its cable connection. To reboot, unplug the cable box from the power, either from the back of the box or from the power outlet on your wall or power strip, for approximately 30 seconds, and then plug it back in. This will begin the boot-up process.
How do I reset my optimum cable box?
Reset Your Digital Cable Box
- Unplug your cable box from either the wall outlet or the box itself.
- Wait 5 seconds and plug it back in.
- During the reset process, the digital cable box will display hold followed by turn on.
- When the front panel on the digital cable box displays the time, the reset is complete.
What do you do when your cable box wont turn on?
Sometimes all it takes to correct this issue is restarting your TV box.
- Power off your TV Box.
- Remove the power cable from the back of the unit.
- Unplug the power cable from the wall outlet or power bar.
- Wait 30 seconds, then reconnect the power cable.
- Wait 30 seconds to 2 minutes for the TV box to reboot.
What does bypass mean on Cablevision box?
The RF Bypass feature puts the receiver box into a bypass mode, allowing the user to record one channel on a VCR while viewing a different channel directly on the TV, provided the TV and VCR are both equipped with cable-ready tuners.
Did Cisco buy Scientific Atlanta?
Cisco Systems Inc. has completed its acquisition of Scientific-Atlanta Inc., a $7 billion deal that significantly bolsters Cisco’s effort to offer carriers a complete data, voice, video and mobility infrastructure lineup.
What is Scientific Atlanta model IPN330HD?
Scientific Atlanta (Cisco) Internet Protocol Set Top Box, model: IPN330HD. Used for digital TV. It has HDMI output, component, coaxial, and composite, S-video. Please note that this is a unit that may require activation from your service provider.
How do I reboot my Cisco DVR?
Reset (power cycle) your receiver by unplugging the power cord from the back of the box. Wait 15 seconds and then plug the power cord back in. Wait up to 20 minutes for the receiver to fully recover and turn it back on.
Why is my Scientific Atlanta Explorer 8300 HD not booting?
Scientific atlanta explorer 8300hd won’t boot! I have a Schientific Atlanta Explorer 8300 HD. It is getting hung when it starts to boot (i.e. “BOOT” appears on the display after you turn it on, but then disappears after approx. 15-30 seconds, but the PVR never actually comes completely up.
How to reset or reboot a Scientific Atlanta cable box?
These directions have been tested on cable box versions 8240, 8300, and 4200. Two methods exist for rebooting your Scientific Atlanta Cable box. The first is to press Vol+, Vol-, and Info buttons simultaneously on the front of the converter. Once the box reboots, you will probably have to press the power button to turn it back on.
Where do I go to Reset my Cisco explorer 8300hd cable box?
The support page on Cisco’s website has some information that might help (Cisco bought out Scientific Atlanta, which developed the HD8300). Alternately, you can contact a customer service representative. If she can’t help with the issue over the phone, she can probably help you set up a service appointment.
How do you reboot an explorer hd8300?
The HD8300 still functions while the plug is in, so the plug must be pulled out for a full reboot. Press and hold the “Power” button. Plug the HD8300’s plug back into the wall socket while continuing to hold the button. Wait 15 seconds, or until “Boot” is displayed on the HD8300’s display screen. This indicates that the unit had been rebooted.
