How do you adjust the tension on an Elna Overlocker?

How do you adjust the tension on an Elna Overlocker?

Locate the upper tension control dial on either the faceplate, near the needle-bar housing or on the upper arm of the machine head, depending on the Elna sewing machine model. If the top stitches are loose, turn the upper tension dial 1/4 turn to the right to tighten the tension.

Why does my sewing have looping underneath?

Looped stitches are usually caused by improper tension. If the loop is on the upper side, it may be corrected by loosening the top tension or by tightening the lower tension. Looping of stitches is sometimes caused by placing the bobbin in the bobbin case the wrong way.

Why does my overlocker skip stitches?

When the stitches randomly start skipping, change your needle. If the stitches return to normal, then the problem was a bent needle. It can be caused by such things as tugging too hard on the fabric or the needle hitting a pin. Another cause may be that the needle and thread are mismatched.

Why does my Overlocker skip stitches?

What thread tension should I use?

So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics.

What’s the tension on an Elna sewing machine?

There are separate manual controls for top and bottom stitch tension. Ensure that the Elna sewing machine top thread is correctly threaded from the thread spool on top of the machine down through the tension disks, down and up through the thread take-up mechanism and through the needle.

Which is the correct threading order for Elna overlockers?

Elna overlockers need to be threaded from right to left, the threading order is lower looper, upper looper, right needle, left needle The needles may need replacing as they are blunt. Use only Elna ballpoint needles Gradually, increase the 2 looper tensions (higher number) until the stitches are sitting on the edge of the fabric

Do you have to use oil on Elna sewing machine?

The good news is that all sewing machines seem to have the same common problems so the source of the problem is easy to find. The reason you buy sewing machine oil as your first lesson is because that is the only oil you should use with your Elna or another sewing machine. 1.

How to check for lint in Elna sewing machine?

If the sewing light is on and you can hear the motor engaging when you put your foot on the control, open the open covers & check that there is nothing jammed in the needle area/ looper area Check there is no lint build-up around the upper knife, de-activate the upper knife moving it out of position to clean around it, then re-activate

Back To Top