How much power can a A833 handle?

How much power can a A833 handle?

An A833 23 spline 4-speed will be fine behind 400 hp.

What is a A833 transmission?

The A-833 (or NP-440) became that transmission for Chrysler. Although it went through some changes over the years, it remained an important performance feature in Chrysler’s passenger cars until 1979 and in the line of trucks and vans into the late Eighties.

What did the NV3500 transmission come in?

The NV3500 is manufactured for both four-wheel drive and two-wheel drive vehicles. The current NV3500 is found in full size GM trucks from 1988 and newer, S10 trucks from 1990 and newer, and Dodge Dakota V8 Ram trucks from 1994 and newer. The NV3500 is a five-speed manual transmission.

What is a Muncie 4 Speed?

Forward Gears The Muncie 4-speed is a constant-mesh transmission. This means that all the gears in the transmission, except for reverse, are always meshed together and spinning, even in neutral. When you shift you are locking a particular-speed gear to the mainshaft.

Does a 350 Turbo transmission have overdrive?

A TH350 is a three speed trans with NO overdrive. The reason you don’t like running down the freeway at high rpms is the same reason why many people switch these trannies out for a 700R4 or a 2004R overdrive trans.

How do I make my automatic transmission handle more power?

There are 6 ways to improve automatic transmission performance and reliability. These are servicing the transmission, changing driving habits, driving with lower gears when loaded, maintaining engine performance, having proper alignment of tires, and having the correct tire size.

How can I tell if I have a NV3500 or NV4500?

NV3500 is light duty and aluminum with the bellhousing made as part of the case. A NV4500 has a much higher load rating, granny 1st gear, cast iron case with bolt on aluminum bell, much larger overall and has PTO ports.

How much HP can a NV4500 handle?

Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well.

Will a NV4500 bolt up to a 350?

Yes. Both Chevy and Dodge had NV4500 versions.

Is a Chevy NV4500 the same as a Dodge NV4500?

They are all very similar with the same case and most of the same parts. The 32 spine has a big conkin vibration dampener on the output side but that it is. The 23 spline is the most interchangable with everything else. You can also put a Chevy input shaft into a Dodge NV4500 to get a fairly easy chevy install.

Back To Top