What is corrugated profile?

What is corrugated profile?

The 13½ – 3 profile is one of the traditional profiled metal sheets and remains popular today. It is commonly known as ‘corrugated’ or ‘sinusoidal’ and is widely used in the agricultural sector.

How much is a sheet of corrugated colorbond?

$18 to $24/sheet Corrugated iron roofing costs $13 to $18 per m2. Powder-coated Colorbond costs around $22 per m2. Double-sided Colorbond costs around $24 per m2. Colorbond Ultra costs about $37 per m2.

How wide is box profile?

They provide 1m cover width (as standard) when lapped and fitted. Uses: Box profile sheets are a modern alternative to the traditional corrugated sheets and are ideal for use on industrial units/warehouses, workshops, storage facilities, garages and sheds etc.

What is the effective cover of a corrugated sheet?

Coverage. Steeline Corrugated has an effective coverage of 762mm when laps of 1.5 ribs are used.

How much do you overlap corrugated roofing?

An overlap of 150mm is often recommended for roofs with 10° pitches, whilst 300mm is recommended for 5° pitches. Always allow for an overhang of at least 60-70mm so that water can run off without coming into contact with rafters or purlins, which can lead to damp and structural weakness.

How much should a corrugated roof overlap?

What is profile sheet?

Color Coated Profile Sheets are the profile sheets with the color coating over the metal surface of these sheets. These profile sheets are manufactured by cold-rolling technique and are hot-dipped galvanized by zinc. Thickness of the colors coated on the surface of these sheets depends on the specific requirements.

What is box profile?

Box profile roofing sheets are a great alternative to corrugated roofing as this is a more modern profile and is used widely on industrial units and agricultural buildings.

How much does a corrugated sheet cover?

“Cover of roofing sheet” : is the measured amount each sheet will cover (including side lap) when layed in position on the roof. IE the cover of a corrugated roof sheet is 760mm or . 76 metre.

Can you use corrugated sheets on a flat roof?

Our box profile tin roof sheets and corrugated iron sheets can be used on a pitched roof or flat roof.

What is the minimum roof pitch for a corrugated roof profile?

Corrugated roofing is a great material on traditional pitched roofs – but it has severe limitations when the pitch gets below 5 degrees. That is why all roofing manufacturers recommend the 5 degree pitch as the minimum slope and they will not provide any guarantees if it is installed flatter than this.

https://www.youtube.com/watch?v=GRRwKwGbcAw

Back To Top