What kind of oil does a Kawasaki KLX 110 take?
10W-40 oil
NOTE: The Kawasaki KLX 110 takes 1.1 quarts of 10W-40 oil.
How much oil does a KLX 110L take?
I just checked my manual, which is for the 110 and 110L, and the capacity says: 1.1L (1.2 US qt).
What spark plug does a KLX 110 take?
Iridium IX Spark Plug CR6HIX NGK 7274 10mm x 1.0 Thread Size, 1/2″ Reach (Fits: Kawasaki KLX110)
What does a KN 112 oil filter fit?
K&N Motorcycle Oil Filter: High Performance, Premium, Designed to be used with Synthetic or Conventional Oils: Fits Select Honda, Kawasaki Motorcycle Models, KN-112.
Does a KLX 140 have an oil filter?
Remove the three 8mm bolts from the oil filter cap on the right side of the crankcase. NOTE: Be careful not to lose the spring that’s housed under the cap. Step 6. Remove the old oil filter, and install the new oil filter with the rubber grommet facing inward.
What oil do you use in a KLX 140?
Fill the engine with 1.22 quarts of 10W-40 motorcycle oil, then reinstall the dipstick.
Pour in 1 quart of 10W-40 oil, then replace the cap and run the engine for a minute or two to circulate the fresh oil. NOTE: The Kawasaki KLX 110 takes 1.1 quarts of 10W-40 oil. Depending on your machine, you may need a different amount or even a different weight, so make sure to check your manual.
How do you change drain plug on Kawasaki KLX 110?
Replace the drain plug, making sure that the crush washer is still on the plug. Thread it by hand, then use a torque wrench to tighten it to 21 foot-pounds. Step 13. Replace the skid plate by tightening the two 12mm bolts at the back of the plate, and the two 8mm bolts on the front.
Why do I need to change the oil on my Kawasaki motorcycle?
Changing the oil on your Kawasaki motorcycle keeps the engine clean and running smoothly, and helps protect moving parts inside the engine. If playback doesn’t begin shortly, try restarting your device.
