What MDS 9148?

What MDS 9148?

The Cisco MDS 9148 Multilayer Fabric Switch is a high-performance, flexible, cost-effective platform providing high-density, line-rate 8-Gbps ports for storage networking deployments in small, medium-sized, and large enterprise environments.

How does Cisco MDS 9148T Fibre channel switch ensure growth in small increments?

Growth in small increments: The MDS 9148T Fibre Channel switch provides an option to deploy as few as twenty-four 32-Gbps Fibre Channel ports in the entry-level variant, which can grow in increments of 8 ports to up to 48 ports. This setup allows four possible configurations of 24, 32, 40, and 48 ports.

What is a multilayer fabric switch?

Move Up to a Scalable Fabric Switch The Cisco MDS 9124 24-Port Multilayer Fabric Switch is a flexible, highly available, and highly secure solution that offers outstanding value for mission-critical deployments. This new switch features 24 ports capable of speeds of 4, 2, and 1 Gbps.

What speed support can Cisco MDS 32g fabric switch can provide?

Grow in-small increments: The MDS 9396T Fibre Channel Switch provides an option to deploy as few as 48 32-Gbps Fibre Channel ports in the entry-level variant, and then grow in increments of 16 ports to up to 96 ports. This allows four possible configurations of 48, 64, 80, and 96 ports.

What is SAN switch?

A storage area network (SAN) switch is a device that connects servers and shared pools of storage devices and is dedicated to moving storage traffic. SAN switches are often Fibre Channel switches, although Ethernet-based SAN switches are also common.

What is the MDS 9132T default buffer credits per port?

32 Gbps Switching Modules or Switches

Number of port groups Cisco MDS 9220i: 1 Cisco MDS 9132T: 2 Cisco MDS 9148T: 3 Cisco MDS 9396T: 6 Cisco MDS 9700 48-Port 32-Gbps Fibre Channel Switching Module: 3
Default buffer-to-buffer credits Auto/Mode E ports: 500
F ports: 32
Minimum configurable buffers per port Auto/Mode E ports: 2

Can I connect a NAS to a switch?

You can connect each one of the two PC’s to one port on the NAS. If the NAS wouldn’t have enough ports, then you would need a switch (or if you need to connect more computers in the future).

How do you make fcAlias in Cisco MDS?

Steps Of Cisco MDS SAN Switch Zoning

  1. Check Connectivity Status of HBA Port.
  2. Create fcAlias Name For HBA Port WWPN.
  3. Create fcAlias for Storage Array Port WWPN.
  4. Create a ZONE and add fcAlias members.
  5. Add the newly created zone to an active zone set.
  6. Commit the zone if extended zoneset is enabled.
  7. Activate the zoneset.

How does Cisco MDS detect Npiv?

To display the status and VSAN membership of the different servers and external interfaces, and to verify that NPIV is enabled on the switch, enter the show npv status command. To view all the NPV devices in the name server database, enter the show fcns database npv command.

Can I connect NAS to router?

The NAS will typically connect to the router via wired Ethernet connection, and then be visible by your computer. At that point, you can run any software set-up that’s required (or added software, such as for automatically backing up your computer).

Back To Top