What sizes do hairpin legs come in?
Stools/Footrests
| Legs | Prongs | Steel diameter |
|---|---|---|
| 14 inch | 2 or 3 | 10mm |
| 16 inch | 2 | 10mm |
| 2 | 12mm | |
| 3 | 10mm |
Are hairpin legs strong enough?
HAIRPIN LEGS ARE VERY STRONG BUT THIS IS ONLY ONE PART OF THE TABLE. OVERALL TABLE CONSTRUCTION AND FIXINGS TO THE LEGS WILL DETERMINE YOUR TABLES OVERALL STRENGTH. The weight which our leg can hold depends on a few things; Leg length, number or rods, classic (10mm) or heavy duty (12mm) construction.
How tall are hairpin legs?
The most common height for dining tables (and desks) is 28″. Shop a set of four 28″ legs here. We normally recommend to use the 1/2″ diameter rod for rigidity or the 3Rod legs for the most strength and rigidity.
How tall should coffee table legs be?
Choose a coffee table height between 16 and 18 inches. A coffee table should measure 16 to 18 inches from the floor to the tabletop. At this height, an average-size adult seated in front of the table can set an object on it without bending his back or straining his arms to reach the surface.
How do you stabilize a table with hairpin legs?
Instead, hairpin legs attach directly to the underside of the table top. Design your own desk top or table top. Because there are no aprons, and to keep the tabletop flat and supported, think about adding wood cleats just inside the hairpin legs. View beneath the tabletop.
Where do you put hairpin legs?
Mounting the legs Hairpin legs are easy to mount and demount. This is done with your tabletop upside down. Simply position one leg at a time in the corners of the tabletop, about 2 ½” in from the edges of the tabletop.
How far in should desk legs be?
So I recommend a minimum of 16” from the end of the table to the front of the table leg to allow for a chair to be pulled up. If your table is over 96” you can push that back to 18-20”.
How tall are the hairpin leg table legs?
Based on our original Fold Legs, These legs feature more curves, more angles and more weight capacity. Heavy mounting plates have 3 holes per legs at 5/16″ diameter. Heights of…
What kind of steel is hairpin leg made out of?
Sold in sets of 4 This heavy duty version of our 3 rod leg uses solid 1/2″ bar in stainless or cold rolled steel for maximum stiffness. Tight bends, clean welds, hand made in the… The heavy duty version of our classic mid-century modern style hairpin leg built from solid 1/2″ diameter steel or stainless steel.
How big is the rod on a hairpin leg?
A sturdy twist on the classic mid-century modern style hairpin leg built from solid 3/8″ diameter raw or stainless steel. The center rod makes for a much more stiff leg…
What kind of legs are used in modern furniture?
The classic mid-century modern style hairpin leg built from solid 3/8″ diameter raw or stainless steel. Formed and welded by hand in the USA. Great for DIY furniture projects. Select…
