How do you do a wireless site survey?

How do you do a wireless site survey?

When conducting a wireless site survey, consider the following:

  1. Understand the wireless requirements.
  2. Obtain a facility diagram.
  3. Visually inspect the facility.
  4. Assess existing network infrastructure.
  5. Identify coverage areas.
  6. Determine preliminary access point locations.
  7. Verify access point locations.
  8. Document findings.

What is wireless site survey in networking?

A wireless site survey is a physical survey of the premises where the wireless network will be installed. A site survey report helps visualize the wireless network coverage areas and data rates.

What are the different types of wireless site surveys?

There are basically three types of wireless site surveys passive, active, and predictive. A passive site survey tool listens to existing access points and other signal sources for signal strength, interference, and access point (AP) coverage.

Why do a wireless survey?

A wireless site survey is the best way to gain this information, because it will reveal areas of channel interference and identify any dead zones, helping you avoid problems as you build the network and prevent obstacles for network users. The main goal of performing a wireless site survey is to determine two things.

What is a passive wireless survey?

A passive WiFi survey is when the surveying device is not connected to any WiFi network and is only listening to the WiFi environment. Typically, the software used for these surveys is configured to scan specific channels and WiFi networks in order to measure signal strength and noise levels.

Which of the following is generated after a site survey and shows the WiFi signal strength?

A heat map is generated following a site survey. A heat map shows the Wi-Fi signal strength in different locations. A wireless access point (WAP) broadcasts information and data over radio waves.

What’s the difference between a site plan and a survey?

Answer: A site plan is prepared by the architect as part of the schematic design drawings, and shows the building and its surroundings. This drawing must be prepared especially for this project. A topographic survey is prepared by a surveyor or engineer, showing the legal boundaries of the site.

What to expect during a wireless site survey?

Examine Floor Plans. The survey process goes much faster if you’re able to provide building blueprints or floor plans.

  • the technician walks through the building to verify the…
  • Assess the Existing Network Infrastructure. Most buildings have a wired Ethernet or…
  • Why do you need a wireless site survey?

    With clients who want to implement WiFi over a wide area, it’s important to have a wireless site survey done. Without it, there’s a high likelihood that, whether it’s an education WiFi setup, enterprise WiFi or any other implementation, users won’t get the best coverage and reception. A wireless site survey can also be useful with existing installations if there are signal quality issues in certain locations.

    How to prepare for a wireless site survey?

    you must have a good understanding of specific requirements for the network that

  • locate a set of building blueprints or city maps.
  • Visually inspect the facility.
  • Are WLAN site surveys necessary?

    Site Surveys More Important Than Ever. Any enterprise that has deployed or is working on deploying an 802.11-based wireless LAN has undoubtedly heard statements like ‘there is no need to perform a site survey – just install the access points and let the wireless infrastructure sort it out.’. Most of these statements come straight from the wireless LAN hardware vendors themselves and are driven by nothing more than accelerating the sales cycle and selling more hardware.

    Back To Top