What is a threaded rod called?

What is a threaded rod called?

Threaded rod, often referred to as a stud, is a rod of varying length that is threaded in a helical structure. Similar in appearance to a screw, the threading extends around and along the rod to cause rotational movements when in use.

What is GI threaded rod?

Galvanized Iron Coated GI Threaded Rod, Round, Size: 6 To 20 Mm

Material Galvanized Iron
Shape Round
Finishing Coated
Usage/Application Industrial Use
Corrosion Resistant Yes

Is threaded rod high tensile?

Allthread, also known as threaded rod or brooker rod, are general purpose fasteners with threads running their full length without a head on either end. Threaded rods are are available in low tensile and high tensile steel, as well as stainless steel.

What is hollow threaded rod used for?

Hollow Threaded Rod This type is hollow along the full length of the stud, with openings at either end. This allows cables and other components to pass through the body of the rod, for example when being used to mount a light fixture.

What is a drop in anchor?

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. Drop-in anchors require a setting tool to install.

What is high tensile steel?

High-tensile steels are low-carbon, or steels at the lower end of the medium-carbon range, which have additional alloying ingredients in order to increase their strength, wear properties or specifically tensile strength. These alloying ingredients include chromium, molybdenum, silicon, manganese, nickel, and vanadium.

What is a M16 bolt?

Metric bolts are made fractionally under their stated size, for instance an M16 bolt will have a shank diameter of typically 15.97mm. This means that a 16mm bolt will fit through a 16mm hole but to allow for misalignment between parts it is common practice to drill bolt holes slightly larger.

How much weight can a M10 threaded rod hold?

Proof load capacities of metric threaded steel rods

Nominal Size Pitch (mm) Minimum Proof Load (kN) 1)
Property Class
M10 1.5 33.6
M12 1.75 48.9
M14 2 66.7

How are threaded rods measured?

When specifying a threaded rod, the length comes after the class of fit. The two are commonly separated by an “x” (read as “by”). Length should be in units of inches for Inch-Standard fasteners and millimeters for Metric fasteners.

What kind of nylon is used in electrical rods?

These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.

What can a threaded rod be used for?

This threaded rod is an excellent choice for use in the chemical industries, oil refineries, food processing, and marine applications. / Buy in Quantity & Save!

Which is lighter nylon or steel rod ends?

Made of impact-resistant nylon, these externally threaded rod ends withstand corrosion as well as fuels, lyes, and weak acids. They do not require lubrication and are 80% lighter than steel rod ends.

What can you do with nylon 6 rods?

Use these cast nylon 6 rods to make sheaves, bushings, and pulleys. All withstand higher temperatures and are easier to machine than standard nylon 6/6 rods. Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

Back To Top