What is a hunter controller?
Hunter controllers allow you to setup multiple Start Times to run programs more than once a day. At each Start Time the controller will cycle through all the Station Run Times on that given program. The controller is running on the power supplied by the backup battery.
How do I program my hunter sprinkler system?
How to Program Your Hunter X-Core Sprinkler System
- Step 1: Set The Current Time. First, you will want to ensure that the current time is correct.
- Step 2: Set the Start Times. Next, turn the dial to “Start Times”.
- Step 3: Set the Run Time.
- Step 4: Set the Watering Days.
- Step 5: Test Coverage.
- Step 6: Finished!
What is Hunter XC?
Overview. The XC was Hunter’s entry-level residential controller that was sunset in 2010. The XC was replaced by the X-Core, which was developed as a more efficient and versatile solution for the same applications. The X-Core is recommended as the replacement for current XC owners.
What are the owner’s manuals for Hunter products?
Easy-to-understand owner’s manuals and instruction sheets make installing and programming Hunter products a simple task. Our manuals contain clear illustrations, easy to read fonts, and are written by the engineers and product managers that brought the products to life.
Where can I find a hunter sprinkler controller?
The cabinet is lockable and weather-resistant for durability, but the controller can be located in your home if you prefer. This easy-to-install 12-zone system lets you manage watering via Android or iOS devices and works with Alexa as well.
Is the Hunter sprinkler pcm300 PC 3-station plug-in?
The irrigation “specialist” alleged it was probably the fault of the box (which he would replace for $350.) And in the “unlikely event” that it was a bad module, he could repair that for $100. Instead, I read all the Amazon reviews of this module, ordered the module, removed the faulty module, re-attached 3 wires, and it works like a dream.
How to troubleshoot a Hunter X Core pump?
Incompatible or defective relay of solenoid. Under sized wire to the pump or master valve. Check the master valve or pump start wire for continuity. Replace or repair the shorted wire. Check that all wire connections are good and watertight. Check electrical specifications for pump relay – Do not exceed controller’s electrical rating.
