What size are mobile home axle bearings?
[5] Most mobile home axles have the #42 spindle [ 1 3/4” x 1 1/4” ] using bearings # 25580 [ 1 3/4” ID] inner & 15123 [1 1/4” ID] outer.
Can you replace spindles on trailer axle?
To replace a spindle, the old one would need to be cut off, and the new one welded into place. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel tracking problems. I would recommend finding a welder who is experienced with trailer axles.
How much weight can a mobile home axle hold?
Axles are rated at various capacities from 1,000 to 10,000 pounds. Exceeding the maximum load capacity of your trailer creates a dangerous situation in which the axles could break while you are on the road.
Are house trailer axles legal?
Any axles built before that were legal as long as they weren’t over width. They started using lightweight bearings and hubs is why they’re outlawed. If they aren’t stamped (or cast into the hubs in raised letters) “for mobile home use only”, you might can still get away with it.
How do I know if my trailer has a mobile home axle?
First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere on the frame. Sometimes, the axle identity is stamped into the axle itself or into the hub if it was purchased as a complete assembly.
How do I know if my trailer spindle is bad?
Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won’t ride properly and can fail again or it can cause other problems such as uneven or excessive tire wear and ride quality problems.
Can you replace spindle on torsion axle?
If you have an Eliminator Torsion axle you can replace the spindle. If the torsion arm is exposed on the backside, you can place the castle nut back on the spindle so that it is even with the end of the spindle, and then hitting the rear of the spindle to force the spindle loose. Remove the hub/spindle assembly.
How much does it cost to replace an axle seal?
Fixing an axle seal can cost anywhere from $150 to several hundred dollars, depending on the make and model of your car. If you detect a leak it’s better to fix it sooner rather than later, as ruining your transmission is an expensive repair.
How do I find out the capacity of my trailer axle?
To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity.
How much are used mobile home axles worth?
About $100-150 per axle…..and you can get $20 each out of a “good” tire and clamp style rim….
Can you balance mobile home tires?
How do you balance a mobile home wheel? Expert Reply: Wheels on a mobile home are balanced just like vehicle wheels with the weights, etc. Trailer wheels are balanced simply by matching up the high spot on the wheel with the low spot on the tire.
Does mobile home have axles?
Mobile homes leave the factory with a tow bar welded at the front of the undercarriage (steel I-beam frame) and a set of axles and tires mounted under it. Both the tow bar and axles/tires are typically removed once the home is installed on its foundation at the site.
How many axles on a mobile home trailer?
Most all mobile homes come equipped with dual axles that include four wheels. The wheels are secured to the axles by either 6 or 8 lug nuts.
What are mobile home axles?
The Dexter MH (mobile home) type axle is designed for limited usage in the delivery of manufactured homes and has a one-time limit use. The axle has steel forged spindles that are not precision ground. The brake assembly is welded onto the beam and not intended to be field replaced.
Can mobile home axles be converted?
Mobile home axle hubs can be converted by changing the axle hub and adding a wheel adapter . In the past, mobile home axle hubs were frequently adapted and repurposed for trailers and even trucks. Today, however, many of these uses are prohibited by law in various states.
