Why has my Zip tap stopped working?
The most common problems you may encounter with your Zip tap are usually caused by a filter that needs to be changed. Your tap will also indicate when the filter is due to be changed with a ‘change filter’ light. Some common problems which can be solved by changing the filter include: Slow flowing water.
How do you reset a Zip tap?
Step 1: Turn the water off at the supply. Step 2: Depress the levers on the HydroTap three or four times until the water stops. This will empty the tanks. Step 3: Turn off power supply at the power point.
How do you get hot water out of a Zip tap?
Press both the red lever and the “safety” button at the same time for access to boiling water. To deactivate the safety button, hold the chilled lever and safety button for 10 seconds until the safety button turns off, it is now disabled and you can have boiling water access by simply depressing the red lever.
How long should a Zip tap filter last?
about 6 to 12 months
As a general rule of thumb, Zip tap filters will last about 6 to 12 months or so. However, the timescale it lasts is dependent upon how heavily or lightly you consume water. For increased water consumption patterns, you may need to replace the filter more often.
How do you reset the filter light on a zip HydroTap?
Step 1: Press [MENU Λ or MENU V] until you see [Filter Flush Off].
Why is my zip tap flashing?
Flashing slowly: This indicates that the boiling water is below the desired temperature. Wait for the light to stop flashing before dispensing water. The flashing light will typically occur after switching on, or coming out of sleep mode.
How do you reset the filter on a HydroTap zip?
Step 1: Press [MENU Λ or MENU V] until you see [Filter Flush Off]. Select this option to automatically isolate the water supply. Step 2: Open the left-hand door or front cover (for compact model) of the HydroTap Command Centre by lifting the locking tab. You will see the filter cartridge in front of you.
Do ZIP taps filter water?
Zip HydroTap uses the latest filtration technology for pure- tasting water. Zip filters are certified to reduce bacteria, sediment, odours to NSF 42 (aesthetic effect) and NSF 53 (health effects). With a Zip 0.2 micron size 1 filter, HydroTap offers the highest quality drinking water.
Is the water in the Zip HydroTap hot or cold?
Red or blue light is flashing; water is not hot or chilled The Zip HydroTap makes it seem like you can access unlimited boiling and chilled water from your tap, but the reality is that there’s a tank in your unit with a maximum water holding capacity.
Why is my ZIP water purifier not working?
If the water temperature is consistently not hot or cold enough, it might mean you’re constantly hitting the bottom of the tank and you have to change your usage pattern to allow the unit to replenish the reservoir. On the other hand, it might be time to upgrade your HydroTap to one with a larger capacity.
What are the most common problems with a zip tap?
Zip tap troubleshooting for common issues. The most common problems you may encounter with your Zip tap are usually caused by a filter that needs to be changed. Your tap will also indicate when the filter is due to be changed with a ‘change filter’ light. Some common problems which can be solved by changing the filter include: Slow flowing water
How do I get ZIP water to stop running?
Step 1: Turn the water off at the supply to the G4 Command Centre. Step 2: Depress each lever on the HydroTap three or four times until the water stops. This will empty the tanks. Step 3 [Commercial model]: Turn off power supply at the power point.
