How do I get into the BIOS on a Surface Pro 2?
Press and hold the volume-up button on your Surface and at the same time, press and release the power button. When you see the Surface logo, release the volume-up button. The UEFI menu will display within a few seconds.
How do I fix the boot loop on my Surface Pro?
If you can only see the Surface logo on your tablet, try these steps:
- Press and hold the Surface Pro power button for 30 seconds.
- Press and hold the volume-up button and the power button simultaneously for 15 seconds or more, then release both buttons.
- Wait 10 seconds.
- Press the power button on its own to turn on.
How do I get into the BIOS on a Surface Pro?
Access Surface Pro BIOS
- Make sure the Surface Pro device is turned off.
- Hold the volume-up button.
- Press and release the power button.
- When the Surface logo appears, release the volume-up button.
- The Surface UEFI firmware interface screen will be displayed and you can make changes.
Why do I boot into BIOS?
Instead of getting to the Windows loading screen, the PC boots directly into the BIOS. This unusual behavior could be triggered by different causes: recently changed/added hardware, hardware damage, improper hardware connections, and other issues.
How do I get to the boot menu on a Surface?
Once Surface has turned off, press and hold the volume-up button. With the volume-up button held down, press and release the power button. Continue holding the volume-up button until the Surface or Windows logo no longer appears on the screen. You should now see the Surface UEFI.
How do I get my computer out of automatic repair?
To change this, type bcdedit /set {default} recoveryenabled no to disable automatic boot repair. If you’re running this command from a command line or PowerShell window in Safe Mode, you may need to replace the identifier value to {current} instead (e.g. bcdedit /set {current} recoveryenabled no).
What do you do when your Surface won’t turn on?
Press and hold Volume Up (on the left side) and the Power button at the same time for at least 15 seconds. [You may see the screen flash the Surface logo but continue to hold for 15 seconds.] Release both buttons and wait 15 more seconds. Turn on the Surface as usual.
How do I get to the boot menu on a surface?
How do I get out of BIOS utility?
Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.
How do I boot directly into BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
