What is Multilink Automix?

What is Multilink Automix?

Multilink Automix is an adhesive luting system for the cementation of indirect restorations made of silicate and oxide ceramics (e.g. IPS e. max), metal and metal-ceramics as well as composites. New: Optimized formula, additional shade “white”, try-in pastes and optimized handling.

What type of cement is multilink?

Multilink Automix is a self-cure with optional light cure adhesive resin cement with a self-curing and self-etching primer.

How do you use Monobond plus?

Apply Monobond Plus to entire surface with a brush or applicator. Let it react for 60 seconds then air dry remaining liquid. Now you’re ready for your cement. Ivoclean, 5g, #637568, and Monobond Plus, 5g, #626221, can be purchased through your dental distributor of choice.

Is Monobond plus a silane?

Silane coupling agents are found in products like Monobond Plus and Monobond Etch & Prime. These products are applied to only the intaglio surface of the restoration for 60 seconds. Monobond Etch & Prime can be used with all methacrylate-based luting composites and all glass-ceramics.

Is multilink dual cure?

With the Multilink Automix System, you can dual cure without compromise. Even though most resin cements are ‘dual’ cured, and most ceramic restorations seem to transmit adequate curing light energy, what you see IS NOT what you always get! However you can expedite the setting time by using a curing light.

How do I bond Emax?

Cement Procedures

  1. Apply IPS Ceramic Etching Gel (5% HF Acid) for 20 seconds to bonding surface of the restoration. Rinse thoroughly and air dry.
  2. Scrub Excite F on preparation for 10 seconds. Thin with air and light cure.
  3. Etching Restoration. Priming Restoration.
  4. Not Required. Not Required.

What is Ivoclean used for?

The universal cleaning paste Ivoclean effectively cleans the bonding surfaces of prosthetic restorations after intraoral try-in and thus creates optimum pre-requisites for the adhesive luting procedure.

What do you need to know about Ivoclar Vivadent?

We Set Standards in Dental Care We at Ivoclar Vivadent recognize you as a dental professional and as an individual. We support you in your work as a dentist, dental technician or dental hygienist so that you can fulfill your passion and purpose: to ensure that people have the best possible quality of life today and in the future.

What is Multilink Automix and what does it do?

Multilink Automix is an adhesive luting system for the cementation of indirect restorations made of silicate and oxide ceramics (e.g. IPS e.max), metal and metal-ceramics as well as composites. New: Optimized formula, additional shade “white”, try-in pastes and optimized handling

What kind of base does multilink hybrid abutment use?

Multilink Hybrid Abutment is a self-curing luting composite for the permanent cementation of ceramic structures made of lithium disilicate glass-ceramic (LS2) or zirconium oxide on titanium/titanium alloy or zirconium oxide bases (e.g. abutment or adhesive basis) in the fabrication of hybrid abutment crowns.

Back To Top