What size wrench fits a 1 1 2 nut?
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt
US Bolts | ||
---|---|---|
Bolt Diameter (in) | Head and Wrench Size (in) | |
1 | 1 1/2 | 1 5/8 |
1 1/8 | 1 11/16 | 1 -3/4 |
1 1/4 | 1 7/8 | 2 |
What size wrench do I need?
Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.
How do you measure a nut for a wrench?
Place the end of a measuring tape on one of the flat sides of the nut’s outer perimeter. Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement.
What size head is on a 1/2 bolt?
Hex Bolt Head Size Chart
Diameter | Head Size |
---|---|
3/8″ | 9/16″ |
7/16″ | 5/8″ |
1/2″ | 3/4″ |
9/16″ | 13/16″ |
What size Bolt uses a 12mm wrench?
Metric Bolt Head/Wrench Size
Bolt Diameter (mm) | Head/Wrench Size (mm) | |
---|---|---|
ANSI/ISO | JIS | |
8 | 13 | 12 |
10 | 16 | 14 |
12 | 18 | 17 |
What are the most common wrench sizes?
Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.
How do wrench sizes work?
Standard wrenches are sold in sixteenth-inch increments up to one and a half inches (and in metric sizes, too, of course). The length of the tool varies in proportion to its size, ranging from about four inches to almost two feet.
What size is a 10 24 nut?
RoHS
Dia/Thread Size | #10-24 |
---|---|
Thickness | 0.130″ |
Thread | Coarse |
Type | Machine Screw Nut |
Wrench Size | 3/8″ |
What size socket fits a 22mm nut?
Size Chart
Bolt size | Size | Tolerance |
---|---|---|
9/16″B-UNF | 13/16″ | 21.09 |
7/16″BSW | 21.29 | |
21mm | 21.46 | |
M14 | 22mm | 22.46 |
What size is a 1/4 inch bolt?
Table B1 HEX BOLT DIMENSIONS | ||
---|---|---|
Bolt Size | A (max) | F Thread Length for Bolt Length |
1/4″ | 0.260 | 0.750 |
5/16″ | 0.324 | 0.875 |
3/8″ | 0.388 | 1.000 |
What size wrench fits a 16mm bolt?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
7/16″ | 16mm | 5/8″ |
1/2″ | 19mm | 3/4″ |
9/16″ | 21mm | 13/16″ |
22mm | 7/8″ |
What is the standard wrench size?
Standard wrenches are sold in sixteenth-inch increments up to one and a half inches (and in metric sizes, too, of course). The length of the tool varies in proportion to its size, ranging from about four inches to almost two feet.
What is socket size for lug nuts?
Lug nut spec is 12×1.5 (metric thread diameter by pitch). 21 mm is the official socket size, 13/16″ will just fit too, slightly snugger.
What size wrench for a metric bolt?
These wrenches can deliver 200-400 ft/lbs. of torque. Metric bolt sizes range from 10 mm to 24 mm. Odd diameters such as 19 mm and 21 mm become common in this range. Standard bolt sizes range from 5/16-inches to 1 inch, again increasing in increments of 1/16-inch.