What do staple sizes mean?
Staple sizes are usually displayed as two numbers split with a forward slash i.e. 26/6 or 10/5. The first number indicates in the gauge of wire used in mm. The second number indicates the depth of the leg in mm (also known as the shank length) So 26/6 means the staple has a 26mm gauge and a 6mm shank length.
What are standard size staples?
1/4 inch
Standard-size staples are 1/4 inch (6mm) in length, capable of stapling anywhere from 2 to 30 pages together at once and designed to fit any standard-size stapler. Most of the time, this is the only staple you’ll need around the office or classroom.
What size are heavy-duty staples?
With a 1/2-inch leg length, the premium staples are designed for heavy-duty staplers.
What size are no 25 staples?
4mm
Rexel No. 25 staples are recommended for a variety of Rexel staplers, including the Mini Bambi stapler. With a staple leg length of 4mm and maximum width of 7.2mm, these high quality steel staples can penetrate up to 10 sheets of 80gsm paper. This pack contains 5,000 staples.
What size staples should you use for upholstery?
Almost any fine wire and medium wire staples can be used for upholstery, depending on your fabric. 20 and 22 gauge staples are the most common staples for upholstery. #7 series staples 22 Gauge, #8 (80) series staples 20 Gauge, and T-50 series staples 20 Gauge are commonly used for these applications.
What does staples stand for in Urban Dictionary?
Staples is a large corporation that sells office supplies, furniture and overpriced computer hardware. Staples is characterized by its huge red buildings and how it kills off all the small supply stores in the area. Working for Staples is like getting your soul ripped out because everday you will probably want to kill yourself.
What does 26 + 6 mean in Urban Dictionary?
“6” means the 6 remaining counties (Fermanagh, Tyrone, Derry, Antrim, Down, Armagh) in Northern Ireland, which belong to Britain. “1” finally represents the united Ireland as one Republic. -“Ya see that “26+6=1″-sticker on that van ?”
What do the numbers mean on a stapler?
The staple number indicated on packaging does cause some confusion. The first digits (24, 26, 23 etc.) normally indicates the gauge of wire. The smaller the number, the heavier the gauge. The second digit indicates the depth of the shank in mm.
What’s the correct size for a staple shank?
This means that the gauge or thickness of the staple is 23 (the higher the number, the thinner the staple) and the length of the shanks is 8 mm. Thus, when shopping for staples, look for the size “23/8.”.
