Does it matter which wire goes where on a light fixture?

Does it matter which wire goes where on a light fixture?

Tip. The fixture still works if you reverse the wires, but the socket sleeve will be hot, and anyone who touches it while changing a bulb can get a shock. When wired correctly, the socket sleeve is neutral and only the small metal tab at the base of the socket is hot.

Can you add a pull chain to any light?

You can fit your ceiling light with a pull-chain switch. Doing so requires you to remove the fixture, drill a hole to screw on a pull switch and wire the black wires through the switch.

Are pull chain lights legal?

NEC 410.16(B) states: “Incandescent luminaires with open or partially enclosed lamps and pendant luminaires or lampholders shall not be permitted.” What this means is that you cannot have one single exposed light bulb hanging down with a pull chain for lighting your clothing closets.

Can you add a pull chain to a light fixture?

You see, you can attach a pull chain to a light fixture so that you can turn it on and off where it’s most convenient to you. This is helpful if you have a light fixture by your bed that is controlled by a switch on the other side of the room.

Why do I have 2 black wires and 2 white wires?

the black and white wires from the power supply side need to be attached to the line side of the new outlet. (it should say this on the back of the new outlet) and the other 2 are to be attached to the Load side of the outlet.

What is code for closet lights?

Distances between fixtures and storage items: For surface-mounted incandescent or LED light fixtures, there must be a minimum distance of 12 inches between the fixture and any items stored in the closet. For recessed incandescent or LED light fixtures, this distance must be at least 6 inches.

Can you put a can light in a closet?

Recessed LED or incandescent lighting fixtures must be installed at least six inches from clothing/storage areas. Incandescent fixtures with open or partially enclosed lamps and pendant fixtures or lamp holders are not permitted in clothes closets.

How do you replace a pull chain light fixture?

Locate the wire connections from the pull chain switch to the unit. Disconnect these wires and pull out the switch. Replace the old switch with a new pull chain switch, then place the end cap back onto the light fixture. Carefully reattach the wires from the switch to the light,…

What is a pull chain light switch?

A pull switch is a switch that is actuated by means of a chain or string. An electric pull switch is attached to a toggle type switch: one pull to switch on and next pull to switch off. The most common use of a pull switch is to operate a ceiling electric light.

What is a lamp fixture?

A light fixture (US English), light fitting (UK English), or luminaire is an electrical device that contains an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.

Back To Top