What is ALOM in Solaris?

What is ALOM in Solaris?

The ALOM command shell is a simple command-line interface. Through the ALOM command shell, you can administer, diagnose, or control the host server, and you can configure and manage ALOM. You are in the ALOM command shell when you see the sc> prompt.

How do I access Alom?

To reach the system console from the ALOM system controller, type the console command at the sc> prompt. To reach the ALOM system controller from the system console, type the system controller escape sequence, which by default is #. (pound period).

How do I get out of Alom?

console. Use the console command to enter console mode and to connect to the system console from the ALOM command shell. To exit the system console and return to the ALOM command shell, type #.

What is ALOM in linux?

The ALOM (advanced light-outs manager) command shell enables you to administer, diagnose, or control the host server.

How do I open ilom console?

Access the Host Console From the Oracle ILOM CLI

  1. Log in to the Oracle ILOM command-line interface.
  2. Type start /HOST/console.
  3. Type y to confirm that you want to access the host console.
  4. If you are prompted for user credentials, enter the requested information to access the host server operating system.

How do I reset my ilom OS?

Reset Oracle ILOM

  1. To reset the Oracle ILOM server SP from the web interface, click Maintenance –> Reset SP –> Reset SP.
  2. To reset the Oracle ILOM server SP from the CLI, type: -> reset /SP.

What does ilom mean?

Integrated Lights Out Manager (ILOM) 2.0 is the system management firmware you can use to monitor, manage, and configure a variety of Sun server platforms.

How do I connect my ilom console?

Ensure that you have Console (c) role privileges in Oracle ILOM.

  1. Log in to the Oracle ILOM command-line interface.
  2. Type start /HOST/console.
  3. Type y to confirm that you want to access the host console.
  4. If you are prompted for user credentials, enter the requested information to access the host server operating system.

How to reset the Alom password on a Sun Fire T1000?

If an ALOM password reset is required on a Sun Fire T1000 or Sun Fire T2000 in case the password is lost or forgotten, the following steps can be taken to erase the ALOM NVRAM so that a user can gain access to it, set a new password and restore the NVRAM settings.

What can you do with the Alom command shell?

Through the ALOM command shell, you can administer, diagnose, or control the host server, and you can configure and manage ALOM. You are in the ALOM command shell when you see the sc> prompt. ALOM supports a total of eight concurrent Telnet sessions and one serial session per server.

Where is the Alom serial port on my computer?

Note: Access to the server’s power cables and the ALOM serial port is required for this procedure. Connect your computer or laptop to the ALOM serial management port. Power cycle the system by unplugging the server’s power supplies, waiting several seconds and then plugging the power back in.

Is there a way to reset the Alom password?

To do an ALOM password reset you must choose ‘e’ to erase the NVRAM. After erasing the NVRAM choose ‘r’ to resume the ALOM boot. You will automatically be logged in as the user ‘admin’ with no password and no permissions. The NVRAM settings will also be reset to factory default.

Back To Top