How do you test a bulb with a LightKeeper Pro?
The Bulb Tester is designed to fit most miniature light bulbs. Place the bulb in the tester making sure the two thin wires of the bulb firmly touch the metal inside the bulb tester. A good bulb will illuminate when its wires touch the contacts of the Bulb Tester.
Will LightKeeper Pro work on LED lights?
No, the LED Keeper uses a different technology specifically developed to perform on LEDs. Fortunately, the LightKeeper Pro is able to fix incandescent holiday lights and has the required technology for these sets.
Does LightKeeper Pro really work?
The LightKeeper Pro can fix about 95% of all light sets. One of the light sets that a LightKeeper Pro cannot fix are those with blackened bulbs.
What does a light keeper do?
A lighthouse keeper or lightkeeper is a person responsible for tending and caring for a lighthouse, particularly the light and lens in the days when oil lamps and clockwork mechanisms were used.
How do you detect which Christmas light is out?
Simply bring the light tester close to each bulb. The tester’s indicator will light up when it’s near a functioning bulb. If you have a non-contact voltage detector, bring the detector close to the wire section between each bulb to test for voltage. The dead section of wire will be the section after your bad bulb.
How does LightKeeper pro fix shunt?
The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This allows it to operate properly. The current can then flow through the light set completing the circuit and illuminating the other bulbs.
How does the LightKeeper Pro Light set work?
How LightKeeper Pro Works. Defective Bulb shunts cause most light set failures. Simply plug your LightKeeper Pro into the light set and pull the trigger. The LightKeeper Pro sends a pulse through the light set, finds the bad bulb, and fixes the shunt—allowing the light set to work properly.
What causes a light keeper pro to fail?
Defective Bulb shunts cause most light set failures. Simply plug your LightKeeper Pro into the light set and pull the trigger. The LightKeeper Pro sends a pulse through the light set, finds the bad bulb, and fixes the shunt—allowing the light set to work properly.
How does the light keeper pro continuity detector work?
CONTINUITY/VOLTAGE DETECTOR: Each wall plug has a Hot, Neutral and Ground contact. Electricity is powered from the Hot contact and flows through the lights. It is similar to water flowing in a tube. The LightKeeper Pro Continuity Detector/Voltage Detector uses an IC (Integrated Circuit) chip to find where the flow of electricity stops
How much does Amazon light keeper pro cost?
Additionally, the built-in Bulb Tester tests the repaired and existing bulbs to make sure they work properly before climbing that ladder New & Used (13) from $17.12 FREE Shipping on orders over $25.00 shipped by Amazon. To see our price, add these items to your cart. Some of these items ship sooner than the others. Choose items to buy together.
