What fluid does a NV3500 take?
Correct, the NV3500 and NV5600 both use a 5w30 weight gear oil, not an 80w90 gear oil. In simpler terms use either Pennzoil Syncromesh, Redline MTL (not MT-90), or Amsoil MTF (manual transmission fluid)…these are all “correct” fluids for the NV5600 and the NV3500.
What fluid do you put in a NV4500 transmission?
These are the only lubricants recommended by New Venture Gear for the NV4500: 75W-90 Castrol Syntorque Synthetic. Mopar Synthetic Manual Transmission Lubricant Mopar P/N 4874459 (Material Specification 9070) GM Goodwrench® Synthetic Manual Transmission Fluid (GM Part No.
What is ap4 fluid?
Pennzoil Platinum® ATF+4 is a robust transmission fluid specially formulated to meet the requirements of a hydraulic fluid used in the transmissions of passenger cars, trucks, and sport utility vehicles. This high quality transmission fluid is fully approved by Chrysler for all brands.
How much power can a NV3500 transmission handle?
NV3500 MG5 has a input torque of 300ft-lbs. with my stock 350 pulling 212hp @4000 and 300ft-lbs @2800 I have had two fail and one of those went out leaving me with only 4th gear. I swapped it with a NV4500 MW3 2004 model. NV4500 can handle 475ft-lbs.
What is the difference between NV3500 and NV4500?
NV3500 is light duty and aluminum with the bellhousing made as part of the case. A NV4500 has a much higher load rating, granny 1st gear, cast iron case with bolt on aluminum bell, much larger overall and has PTO ports.
What can I use in place of manual transmission fluid?
Fluid Motion It may use regular motor oil, heavyweight hypoid gear oil, or automatic transmission fluid. If you don’t have an owner’s manual, check a local certified repair shop or the dealer’s service center to find the right fluid for your vehicle.
How much transmission fluid does a NV4500 take?
Made in U. S. A NV4500 transmission oil capacity is 4 quarts for stock transmissions or 5 quarts for NV4500HD 4×4 transmissions used to replace the Getrag G360. “
How much power will a NV4500 handle?
Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well.
What are the different names for a Getrag transmission?
This transmission has three different designs and designations. Commonly referred to as a Getrag, it is also known as a HM290 (Hydramatic), a 5LM60 (Muncie) and a NV3500 (New Venture). As the main differences are internal, you will need to tear down the unit before ordering the rebuild kit.
What kind of transmission fluid does a GM NV3500 use?
GM recommends that users use GM Synchromesh manual transmission fluid. It is certified to keep your transmission running smoothly between -40 and 300 degrees Fahrenheit. There are really going to be two different situation you may find yourself in when needing to identify a NV3500 manual transmission.
What kind of fluid does GM syncromesh use?
As the main differences are internal, you will need to tear down the unit before ordering the rebuild kit. This transmission uses a special GM Syncromesh synthetic fluid, which is available from your local dealer.
What kind of transmission fluid does GM use?
Transmission Fluid GM recommends that users use GM Synchromesh manual transmission fluid. It is certified to keep your transmission running smoothly between -40 and 300 degrees Fahrenheit. NV3500 Identification
